M&P15 picture thread
- Thread starter Jay5oh
- Start date
shawnfergie
Member
How do you like it?
I just picked one up from Primary Arms and was going to give it a try.
wjs81866
Member
Added Magpul butt and hand guard.
Vortex Strikefire 2 with Vortex Magnifier
Vortex Strikefire 2 with Vortex Magnifier
My very 1st AR15 will be a M&P15OR, I found it for 9 big bills, I cannot afford to pay for it all at one time so it's on layaway. Same gun dealer for 40 years and they guarantee what they sell along with S&W life.
My 1st addition will probably be the Troy folding battle sites and then the Magpul CTR stock. I am guessing it's probably best to change out the stock due to the way the locking device works on the one that comes with it. I did notice my AR has a S&W logo molded into the present stock.
My 1st addition will probably be the Troy folding battle sites and then the Magpul CTR stock. I am guessing it's probably best to change out the stock due to the way the locking device works on the one that comes with it. I did notice my AR has a S&W logo molded into the present stock.
Other than Troy
I have no experience with sights for the M&P15 OR and so I am only going by sight and past recommendation for the Troy product. I know their are some that would never buy another Troy product. If someone could actually recommend another manufacture that has same function and appearance, I would welcome your suggestion. I cannot afford to make a purchase and then change in 3 months.
Thank you, I am on this forum for shared experience from others.
I have no experience with sights for the M&P15 OR and so I am only going by sight and past recommendation for the Troy product. I know their are some that would never buy another Troy product. If someone could actually recommend another manufacture that has same function and appearance, I would welcome your suggestion. I cannot afford to make a purchase and then change in 3 months.
Thank you, I am on this forum for shared experience from others.
noslolo
Member
I'll have to post pics as soon as my last parts come in. I have a sport, which I have added a Magpul hand guard, Ergo hand grip, J&P yellow trigger springs and a match grade front sight post. I also already have a TRS-25 and a O-light M-20 flash light. I'm just waiting for the riser and the flash light mount.
noslolo
Member
Doh, I forgot to mention the YHM muzzle brake.
Pinger5.56
Member
- Joined
- Mar 27, 2014
- Messages
- 128
- Reaction score
- 17
My Sport
Here is my M&P 15 Sport
All I want is a flashlight for it maybe.
Here is a list of what's installed
1: GMG extended carbine quad rail
2: Tapco rail covers
3: Acid Tactical ladder rail covers
4: MOE RVG
5: SunOptics USA Mil-spec Carry handle
6: Ultimate Arms Gear 4x20 carry handle scope
7: BCM charging Handle (Mod 4)
8: BCM extractor upgrade spring kit
9: BCM carbine spring and H1 buffer
10 Magpul MOE+ grip
11:Magpul B.A.D lever
12: DPMS extra large safety switch
13: DPMS Jerry Miculek muzzle brake
14: Magpul CTR butt stock
I got a lot of rounds through this rifle and love it. I went with the classic carry handle with the scout 4x20 scope and that scope is dead on at 75 yrds. Have not tried it at 100 yet.
With that muzzle brake and the H1 buffer the extended rail it had no recoil at all, like shooting a .22.
I will admit it does have some weight to it, but I am a larger guy so the weight with my single point sling is nothing, wanting to get a nicer 3 point sling system for it sometime.
Here is my M&P 15 Sport
All I want is a flashlight for it maybe.
Here is a list of what's installed
1: GMG extended carbine quad rail
2: Tapco rail covers
3: Acid Tactical ladder rail covers
4: MOE RVG
5: SunOptics USA Mil-spec Carry handle
6: Ultimate Arms Gear 4x20 carry handle scope
7: BCM charging Handle (Mod 4)
8: BCM extractor upgrade spring kit
9: BCM carbine spring and H1 buffer
10 Magpul MOE+ grip
11:Magpul B.A.D lever
12: DPMS extra large safety switch
13: DPMS Jerry Miculek muzzle brake
14: Magpul CTR butt stock
I got a lot of rounds through this rifle and love it. I went with the classic carry handle with the scout 4x20 scope and that scope is dead on at 75 yrds. Have not tried it at 100 yet.
With that muzzle brake and the H1 buffer the extended rail it had no recoil at all, like shooting a .22.
I will admit it does have some weight to it, but I am a larger guy so the weight with my single point sling is nothing, wanting to get a nicer 3 point sling system for it sometime.
Attachments
Pinger5.56
Member
- Joined
- Mar 27, 2014
- Messages
- 128
- Reaction score
- 17
Is that a GMG extended carbine quad rail.
My M&P Sport. I've had it for about a year now, with roughly +4k rounds of most every brand and grain I can get my hands on, with near flawless results.
From front to back:
Troy medival muzzle brake
NForce 200 Lumens light
13" UTG Super slim FF
Magpul MBUS
Bushnell AR Optic 223 3-9x40
Burris PEPR
BCM ambi charge handle
BCM Mod 3 Grip
Magpul QD
Magpul CTR stock
Geisselle Super Semi Auto trigger
Not shown:
Magpul MS3 sling
UTG 98 bipod
Bushnell TRS 25 on a 45 degree Weaver mount
Had the following previously:
Magpul BAD
9" UTG quad FF
Hogue Grip
Magpul AFG2
Next up:
TBD 1-4 illuminated optic
Ambi safety
From front to back:
Troy medival muzzle brake
NForce 200 Lumens light
13" UTG Super slim FF
Magpul MBUS
Bushnell AR Optic 223 3-9x40
Burris PEPR
BCM ambi charge handle
BCM Mod 3 Grip
Magpul QD
Magpul CTR stock
Geisselle Super Semi Auto trigger
Not shown:
Magpul MS3 sling
UTG 98 bipod
Bushnell TRS 25 on a 45 degree Weaver mount
Had the following previously:
Magpul BAD
9" UTG quad FF
Hogue Grip
Magpul AFG2
Next up:
TBD 1-4 illuminated optic
Ambi safety
Attachments
BIGmuddyBRONCO
Member
I took my M&P sport and bought it some new clothes!
Magpul MOE carbine stock, Forend and Grip. Stryker Machine & Tool (Local Business) Mil Spec buffer tube(Because my dumba** dorked up the threads removing the old one), ADG Aimpoint Micro clone and a single point sling mount butt plate.
Magpul MOE carbine stock, Forend and Grip. Stryker Machine & Tool (Local Business) Mil Spec buffer tube(Because my dumba** dorked up the threads removing the old one), ADG Aimpoint Micro clone and a single point sling mount butt plate.
Redfishcatcher15
Member
- Joined
- Jan 29, 2011
- Messages
- 2
- Reaction score
- 0
TheMaineEvent
Member
Here's an updated family photo:
Dragonfly
Member
M&P15 Mid MOE with Aimpoint PRO and Hogue Overmolded stock
Sorry, I guess these were too big. Or not...the passive aggressive nature of the complaint ("somebody above needs to reduce the size of their pictures") makes it hard to tell.
Sorry, I guess these were too big. Or not...the passive aggressive nature of the complaint ("somebody above needs to reduce the size of their pictures") makes it hard to tell.
Last edited:
Armybrat
Member
One of my grandsons shooting a centerfire rifle (my Sport with a Magpul handguard) for the first time - on a ranch near Lampasas, Texas (I admonished my son for not making him wear the eye protectors I sent with them):
BTW - somebody above needs to reduce the size of their pictures - the giant photos are rendering page 18 almost unreadable.
BTW - somebody above needs to reduce the size of their pictures - the giant photos are rendering page 18 almost unreadable.
Last edited:
