New Lyman Presses

CCantu357

CCantu357

Member
Joined
Oct 19, 2008
Messages
970
Reaction score
832
Location
Baton Rouge, LA
Due to some hurricane damage, I need to replace my old RCBS Partner reloading setup and have decided to upgrade. While the Hornady Classic, Redding, and the Rock Chucker are all good options, I always liked the Lyman Orange Crusher and Crusher II as well. I haven't kept up with reloading news too much over the years, and I noticed that Lyman has completely changed their reloading catalog. The Crusher and T-Mag are gone, as well as the old 310 and the 55 powder measure. The new line is called the Brass-Smith.

Does anyone know how these new presses stack up? Are they as good as the old Crusher and T-Mag? Or would another brand be better?
 
Register to hide this ad
I like the looks of their 8 station turret press. I don’t know the name but it competes favorably with the Redding T-7. I’m still using a Lyman All American along with several other presses on my bench. I’ve heard the Brasssmith stuff is made in China!
 
I would love to get a straight answer on where many of these presses are made. To be honest, I love RCBS, but I often read online that many of their presses are made in China. If I remember correctly, the old Lymans were American made, but fact that they have changed their entire reloading lineup makes me wonder. From what I have read, Hornady and Redding are made in the United States. I hope that both Lyman and RCBS are as well.
 
Based on the equipment i have seen and owned, I would steer you away from Lyman in favor of RCBS or Redding.
edit to add: I had not heard that RCBS presses are being made in China. That would be unfortunate. They were bought out by one of those huge fund managers a few years ago and now are part of Vista Outdoors. Lyman has also been bought out. I could easily believe that Lyman presses are made in China from the ones I have handled lately.



I know if you bought a Redding you would never look back. They are a little pricey but it's a press you could leave to your great grand children. Then again, an "O" press from Lee would probably last as long. I even had one of the Lee four-hole turrets and I would have kept it if I had room on my bench for a third press.
 
Last edited:
Does it have to be new? There seem to be many used presses out there that can be quite good and can be had at advantageous prices. I can’t remember ever buying a new press, but have several… oh yeah, Dad bought a new RCBS Jr and a Dillon 450 sometime back in the late ‘70s or early ‘80s!
Presses don’t seem to wear out!
Froggie
 
Each site I’ve checked states country of origin as United States for the Brass Smith All American.

I picked up one of the Brass Smith measures a while back, I like it.

I’m no big fan of any particular color of loading product, but I do know what I like. Lyman and other presses I’ve owned and used cam over past the top have always been an irritant while adjusting dies. Regardless the Lyman have all been built like a tank.
 
Forster and Redding are still made in the USA, Lee also as far as I know!
 
I have the Lyman 8 station turret press. I like it. Well built, solid, and works well. The primer feed needs some help though, jambs frequently. I’m going to modify a bit.
 
FWIW, I added a Redding ‘Big Boss II’ to the bench recently, so far very good.

Midway had a handful in stock. I could of saved $25 on the big boss buying elsewhere, but there was an assortment to the order, so I stuck with them.
 
Thanks for all the replies. I have to admit, RCBS has been very good to me. From what I have read, there seems to some confusion regarding where they are made. Apparently, some of the kits say made in the USA and China. This is understandable, as I figure the press is most likely made here, with the some of the smaller metal and plastic tools made overseas. I can live with that, as long as the press is made here. Of course, both the Hornady and Redding presses look nice as well. They are classics; I like the idea of buying a press that has a history.

I was just confused by Lyman's complete change up of their reloading line. Even the new kits come with the Lyman manual with the old Crusher on the cover!
 
Last edited:
I have been using the Lyman Brass smith press for a little over 3 yrs. now and like it a lot (was using 2 lee pro 1000, 1 lee turret and 1 lee O press for the last 25 yrs.) the only down side is the primer dispenser, got rid of it and hand prime. I really like the 8 hole turrets you can put 2 set of dies on one turret head, I have 3 heads 1 with 38 and 357 dies, 1 with 9mm and 45acp and 1 with 223 and 44. everything else I use the Lee O press for. also the Lyman is made in the USA.
 
I notice that RCBS specifies "Made in the USA" on their dies and progressive presses but not on their single stage presses. What a shame.
 
I have a Lyman Tru-Line Jr 4 station turret press. It's gotta be 70 years old. I had conversion turrets made to use ⅞ dies. I have one set up for each pistol caliber.
 
it has been a few years ,but i seem to remember reading.RCBS has their press made as a raw forging in China but machined and assymbled in the US, i could be remembering wrong on this
 
As you said..raw forging in China Line bored and finished here. A sshame really Redding is made here and not a lot more expensive than RCBS. Heck even Lee's classic cast presses are made here
 
You must log in or register to reply here.

Similar threads

R
Dillon presses
2 3 4
Replies
65
Views
4K
glenwolde
glenwolde
T
Lyman Spartan Reloading Press Question
Replies
11
Views
654
BE Mike
BE Mike
38SPL HV
38 Spl +P with Lyman 358477 SWC - Test Results
Replies
13
Views
997
38SPL HV
38SPL HV
lrrifleman
Question about Lee single stage presses
Replies
16
Views
1K
SGT ROCK 11B
SGT ROCK 11B
D
Lyman 51st Edition…worth it?
2
Replies
20
Views
3K
TheTinMan
T

Latest posts

Back
Top