New rear sight for my Sheild

Houser52

Member
Joined
Jun 6, 2014
Messages
104
Reaction score
50
Location
North Carolina
Certain recent events that hit close to home have made me a lot more aware of what happens during an exchange of gunfire. One of these things is being able to charge a semi auto pistol one handed.

The more I thought about it the more it made sense to swap the stock rear sight on my Shield to one that I can manipulate the slide one handed, using whatever is available ie, shoe, corner of a desk, steering wheel, tree or whatever I can push against. You never know when one arm will be left useless for whatever reason.

You see, this past August my son was the victim of a home invasion/robbery and was shot in his strong arm leaving it useless. He spent almost 3 weeks in the hospital and survived but still doesn't have the use of that arm. Hopefully one day he'll regain it's use but it's going to take time and lots of therapy.

When looking for one, I found out that there's not a ton of squared off rear sights available. Sure, they are out there but just not as many like regular tapered sights.

I didn't have any particular brand in mind but ended up going with Dawson's Charger rear sight in all black. I also looked hard at the similar 10-8 U Notch rear but wasn't sure if I would like the U notch. Another thing I'm switching to is an all black rear, without dots, but still use my front fiber optic. The reason for an all black rear is that I've read where it's a lot easier for my older eyes to pick up the front sight.

If the new Charger sight works out for me, I'll install one on my son's gun.

Have any of you changed your rear sights to the one like I have described? How has it worked out for you?
 
Register to hide this ad
My Shields still carry stock sight (w/white dots blacked out). However for my midsize M&P .45s, I went with the 10-8 wide "U" and am pleased with the results. Especially if you have more mature eyes. YMMV
 
I do find it interesting that the Shield has a sloped rear sight. All the other M&Ps have a rear with a ledge for exactly what you're talking about:
M&P 40 Rear Sight
Rear%20Sight%201%20of%201_zpsetuqelka.jpg


M&P Shield Rear Sight
Rear%20Sight%201%20of%201_zpsopx6oh67.jpg



I have changed out the rear on my 1911 to the 10-8 U notch and I like it a lot. I will probably do the same to my Shield eventually.
After%207948%20roundssmall_zps4kkw3uid.jpg



Every time I go to the range, I shoot the last magazine or two with my support hand. I always do it one handed. I'm not trying to become an expert with my support hand, just familiar. The only time you'll ever use your support hand in self-defense is when your shooting hand is injured or unavailable for some reason. I highly suggest everyone do this practice. The life you save could be your own.

I hope your son heals up. I'm very sorry to hear of his injury.
 
Thanks for the replies guys. Glad to hear that type of sight is works well.

I ordered my sight last week so I hope it shows up in the next couple of days.
 
you already made your choice but check trijicon HD you can easily pull the slide from the rear sight.
 
Ameriglos

I recently had Ameriglo i-dot night sights installed on my Shield, model SW-245. The rear sight is squared off and seems sturdy, and I can charge the slide by levering the sight against a table edge, doorframe, etc. Honestly that wasn't the main reason I picked these sights, but it's good to know I can do this if I need to. Hope your son will recover fully.
 
My sight arrived this morning and I got it installed. It comes over sized and a small amount of filing was done when fitting it.
It has a dull black oxide looking finish. The rear notch is nice and sharp. The back of the sight has serrations to reduce glare and the slightly concave front also has serrations to help bite into whatever you're pushing against when racking the slide.

Hopefully this evening I'll get to do some shooting and see how close I got on the windage.

 
Back
Top