Am considering the purchase of the new S&W Model 19 Classic - the most recent model without an internal lock. Is this model properly hot blued or does it wear a dull coating that has become all too common in recent years?
Thanks.
Thanks.
New S&W Model 19 Classic (No internal lock)
- Thread starter Handgunner00
- Start date
Register to hide this ad
OP
Disregard. Found that these new Model 19 Classics come with a high-polished blue finish.
Still, I'd really want to test the action carefully before purchase. Don't let that shiny gun sell yo.u
OP
Agree completely! I'm hesitant to make this purchase since I had problems with a new Model 19 from the first batch in the Classic Series that came out a couple of years ago. That model had a different SKU and UPC than today's model. It also had a black Cerakote finish and an internal lock. The earlier Model 19 Classic was identified as 19-9 where as today's Classic is a 19-10. So must wonder if the early issues with this Classic have been remedied and the production of the 19-10 can be considered "new and improved" or just "new and shiny."
Engine49guy
Member
On the topic of current gun finishing picked up an AR15 with a barrel finished in that "Melonite" finish that SW uses on their Sport line barrels , looks shiney and black has me wondering if this is something that is or can be used on handguns?
Engine49guy
Member
The only way I can remember the terminology is the letter M and N are after eachother so Melonite is Nitride where Phosphate and Parkerizing both start with a P.
I notice the melonite barrels will leave a slight orange residue on a white oiled cloth after sitting a while so guessing its not as impervious to moisture and corrosion as parkerizing?
I notice the melonite barrels will leave a slight orange residue on a white oiled cloth after sitting a while so guessing its not as impervious to moisture and corrosion as parkerizing?
Honestly, You can get a fairly decent M19 dash whatever for around the same money.
Then you can enjoy the quality of a true classic. I see your pic is MACV, Welcome home brother.
Then you can enjoy the quality of a true classic. I see your pic is MACV, Welcome home brother.
It is likely just me, but I thought S&W really messed up the lines of the J, K and L frames with the hillary hole and was hoping they would go back to the old classic K-frame look when they dropped that egregious device.
Then again, I hear the barrels are screwed in so tight you cant take them out and I've even heard of a few breaking off at the front of the frame - but that wasn't many and it may be from a particular lot.
Riposte
Then again, I hear the barrels are screwed in so tight you cant take them out and I've even heard of a few breaking off at the front of the frame - but that wasn't many and it may be from a particular lot.
Riposte
IIRC, someone posted that in the new Mountain Guns, S&W used some of the space where the ILS was to add parts to be able to pass California's cocked hammer drop test requirement.
So, were you also MACV??
Similar threads
