Possible purchase Model 1926

[DETROIT]

I'm looking at buying a 4" 44 special with a serial number that puts it around 1929 production. Now the #'s on the frame and cylinder match but the barrel shroud is blank. I believe the stamps on the frame indicate that the gun was worked by s&w in 71. Let's say the barrel was replaced with a correct era barrel and the revolver re-blued.

Would the revolver be worth his lowered price of 1300 shipped.

 

[DETROIT]

One more pic

 

[Muley Gil]

I must be missing something. I don't see any date stamp on the grip frame. Is there a star on the butt by the SN?

In today's pricing, I would guess that $1300 would be a fair price.

 

[wheelgun610]

... the #'s on the frame and cylinder match but the barrel shroud is blank...

Look closer. The S/N in the shroud is probably just in smaller font size than you're expecting. It should be in the small recess where the ejector rod tip lives. That's where it is on my Model of '26 in the 33000 serial range. And yes, it's difficult to see - even on a nickel finished gun.

Mark

 

[Kinman]

I'd pay that much for a nice 4" S&W in .44 that presented itself that well, especially since it isn't adorned with all that barber shop engraving and is blued instead of nickle. Factory reworked pieces have a certain presence to me, I like them and if not heavily used following rework usually are in very good condition internally, wear wise.

 

[Kansasgunner]

I'm with Muley Gil, not seeing the rework date stamps on the grip frame. What stocks are on it? From what I see it would already be home with me.

 

[Summersteel]

Looks like a reblue to me, even without a stamp on the frame.
Probably wouldn't stop me from buying it, tho.

 

[DETROIT]

I must be missing something. I don't see any date stamp on the grip frame. Is there a star on the butt by the SN?

In today's pricing, I would guess that $1300 would be a fair price.

On the right side bottom there is a 7 1 B,

 

[DETROIT]

I'm with Muley Gil, not seeing the rework date stamps on the grip frame. What stocks are on it? From what I see it would already be home with me.

Non diamond magnas gold medallion, I have a set of silver magnas if I get it.

 

[DETROIT]

Look closer. The S/N in the shroud is probably just in smaller font size than you're expecting. It should be in the small recess where the ejector rod tip lives. That's where it is on my Model of '26 in the 33000 serial range. And yes, it's difficult to see - even on a nickel finished gun.

Mark

Thank you, there might be a faint 3. But it is hard to tell from the pictures that he had sent me.

 

[Muley Gil]

On the right side bottom there is a 7 1 B,

Those sound like fitter's marks to me. Date stamps are usually on the left side and look like 8.54, for August 1954.

 

[StrawHat]

I don't see any obvious signs of reblueing. The studs and pins that should be proud, are proud. The sideplate seam is not wallowed out nor are the screw holes. Looks good to me. At that price, I might have jumped on it!

Kevin

 

[bruce5781]

I don't see any obvious signs of reblueing. The studs and pins that should be proud, are proud. The sideplate seam is not wallowed out nor are the screw holes. Looks good to me. At that price, I might have jumped on it!

Kevin

Not all are proud.

Sent from my SM-G781U1 using Tapatalk

 

[22hipower]

Non diamond magnas gold medallion, I have a set of silver magnas if I get it.

Magnas or service grips? Magnas would look good but didn't show up until about 1935 so they wouldn't be correct for a 1929 gun. If it is a 1929 it might be tricky to know which grips would be correct. The non-medallion grips were used in the 1920s but I don't know exactly when those shifted to the silver medallions as are on my 1931 3rd Model. Not sure if a letter would tell you either.

Nice gun, I'd buy it at that price.

Jeff
SWCA #1457

https://flic.kr/p/2nPnSzF https://www.flickr.com/photos/194934231@N03/
https://flic.kr/p/2nPnxgE https://www.flickr.com/photos/194934231@N03/

 

[OFT II]

My third model shipped in March of 1929. It has non-medallion service grips with the s/n penciled in the right grip.

 

[JSR III]

The non-medallion grips were used in the 1920s but I don't know exactly when those shifted to the silver medallions as are on my 1931 3rd Model.

Based only on my observations from my database of over 2,000 listings for the .22/32 HFT's, the non medallion stocks were used for the whole decade of 1920-1930. I show a few fliers for gold or silver or even one hard rubber but believe them to be incorrectly added to the guns at a later date. FWIW

 

[StrawHat]

Not all are proud.

Sent from my SM-G781U1 using Tapatalk

Good eye! Better than mine. I stand corrected!

Kevin

 

[DETROIT]

Well I bought it, should be shipped out tomorrow or Friday

 

[Peak53]

I'm pretty sure you will be happy with the gun, but I think it may be an older not that bad non-factory reblue, given the lack of factory date marks. Is that trigger blue? Hammer looks to be polished.

 

[Summersteel]

NICE!
Congratulations...