Recoil spring 5906 5' slide?

[Extremo]

What recoil spring fits a 5 inch 5906?
Ordered a couple a while back but now i notice that they are too short.

Wolff don't have any for the 5'.

 

[Toxic Avenger]

My 5906 PC (PPC) takes the same recoil springs as a 5 inch 9mm 4506. On SW parts lists there is the factory and wadcutter springs, as a set or indivdual. The 5906 and 952 PC 9mms come with the wadcutter spring. This info was hard to get, but a call to SW PC revealed the secret. My problem is the empty casings hit me in the face. The factory standard (14 weight?) is too heavy for standard 115 and 124 gr 9mm. I am using the wadcutter. My 5906 PC is new (1000 rnds thru it) and will be going back to SW to be fine tunes.

 

[handgunner356]

Use the Wolff springs listed for the 4506, usually the 10-12# work the best with 9mm. The factory 45 wadcutter spring and 5" 9mm spring are the same 10# rating.

 

[Extremo]

Thanks!
Just the info I needed.