Smith & Wesson PC Model 13-4 Serial Numbers HPC0001 & JPC0001 Together Again !!!

[sethconnor]

PC13 Factory Performance Center Brochure/Flyer

Thank you for the prompt response! My PC-13 is my favorite of all my later model S&Ws. Your matching 001 set is just awesome as well as your information.

I guess I at least have everything that was provided by the factory for the 13-4 if the flyer was separate. I do have the original box label but it is loose now inside the box as its glue deteriorated and separated from the plastic blue box long ago. My PC13 is HPC0183 near the end of the first run of 200. Just can't bring myself to shoot it since its still new and unfired from the factory but have a 1981 13-2 3" that I take to the range if I get the urge!

I will contact Smith and Wesson Performance Center this week to see if they have an archive of the old flyer brochure that they might be willing to image/share and report back.

Have a great weekend and thanks again for the great information and photos of your #1 pair.

 

[sethconnor]

PC13 Factory Performance Center Brochure/Flyer









Here is some pictures of my PC13 along with my wife's "pre-lock" Lady Smith LS65-5

My PC13 Revolver manual is 6/93 Packed by #4
Warranty Card Registration is dated 4/94
Box Label is Product Code 170059
SN HPC0183 Spec Ord 5054
Model No 013 .357 3 Barrel Finish B Stock RB
Thanks!

 

[sethconnor]

UPDATE - PC13 Factory Performance Center Brochure/Flyer

Dear Bullseye_GA:

I spoke with, Steve, a Smith and Wesson Performance Center Customer Service Representative today. Unfortunately, they only started archiving sales literature on Performance Center firearms within the last 10 years thus they don't readily have a file copy of one for a 1995 era PC13 lew Horton. He did say that these were made in such low volume that very few of the brochures/flyers were ever produced. He suggested reaching out to others on S&W forums that may have one in an effort to create a scan (which is what I'm doing here!). He did say that there are old timers at Smith and Wesson that still keep binders on all documentation related to product offerings and there is a good chance its in a file drawer at S&W but would be almost impossible to find. Kind of neat. He further said that since mine was still new, I could fill out the warrantee online (so I don't have to send in my original) and S&W would honor the manufactures warrantee. Also very neat.


Again, I would be very appreciative if any one with one of the PC13 original sales flyers could scan one and email it to me at: [email protected]

Thanks!

 

[swpc]

Mod. 13 PC

PC would ship all # 0001 to Lew Horton directly, for his collection. The MagNaPort differences were just changes that were done between myself and Ken Kelly MagNaport. Making
subtle changes on specials.

SWPC

 

[Bullseye_GA]

PC would ship all # 0001 to Lew Horton directly, for his collection. The MagNaPort differences were just changes that were done between myself and Ken Kelly MagNaport. Making
subtle changes on specials.

SWPC

Thank you for posting up this information.

 

[Bullseye_GA]

Dear Bullseye_GA:

Again, I would be very appreciative if any one with one of the PC13 original sales flyers could scan one and email it to me at: [email protected]

Thanks!

GOT IT! (Thanks to Earl M at LHD) I will email you a copy in a minute...

 

[SmithNut]

Nice old Zombie thread, found this while searching info about the PC13 revolvers...
My photos aren't showing up since my photo company has changed a couple times since this thread was started.
Hoping this link below will take you to ImageShack, at least until I learn how to post pics on this new platform.

https://imagizer.imageshack.com/v2/650x554q70/r/923/xFE7Au.jpg

Cheers.....

 

[Engine49guy]

Never knew these existed, woud fit nicely in between my 3" 547, 3" 19-7 K Comp and 3" 65-5 Ladysmith.
Do you know what brand the supplied PC stocks were?
The Spegals are a huge upgrade.

Posting pics is super easy from my phone, I just grab a quick screenshot then click attach files, select photos videos and click the pic I want, just did that with your M13 pic and posted it below.