STAINLESS S&W MODEL 1006 GUIDE ROD NUMBER

[LIGHTNING-FAST]

Would anyone happen to have s&w model 1006 guide rod, number.i noticed a small crack at the head of guide rod about 2mm long if you can help thanks tom

 

[WR Moore]

Should be the same part number as the guide rod for a 4506 (or any of the other 5" slide assembly variants). Check Brownells factory parts or contact S&W parts department.

 

[Shadow1006]

You could also check here...
Numrich Gun Parts...
Numrich Gun Parts Corp. - The World's Largest Supplier of Firearms Parts and Accessories

 

[LIGHTNING-FAST]

Thanks for all your help

Hopefully someone will answer this question, Guide rod for my 1006 up next to head of guide rod there is about a 2mm long crack i had to look cloce even to see it. Will this be ok and how much force or pressure is on guide rod Thanks for your help.

 

[Shadow1006]

Well if you would have visited the Numrich site the list parts in a exploded view.

I have never seen any of mine crack...However contact S&W to see if they will send you a new part and make it right!

 

[Shadow1006]

Recoil assembly...prices may be different today!

scematic part #60 - Factory Part #103200000 $10.66 X RECOIL SPRING GUIDE ASSY

scematic part #07 - Factory Part #105150000 $9.45 X BARREL BUSHING

 

[LIGHTNING-FAST]

HAS THE ORIGINAL GUIDE ROD BEEN DISCONTINUED

Recoil assembly...prices may be different today!

scematic part #60 - Factory Part #103200000 $10.66 X RECOIL SPRING GUIDE ASSY

scematic part #07 - Factory Part #105150000 $9.45 X BARREL BUSHING

I just got a new recoil guide Rod for my 1006 S&W from smith and wesson invoice reads #103200000 s&w 4506 has this same part# 103200000. but this guide rod i recieved today is i inch shorter than the old one. The small plastic wrapper that the Rod was in also reads 103200000 they also sent a return slip Guide rod for model 1006 measures four and half inches i have checked all known gun parts houses ther is not one to be found. Smith & Wesson has discontinued themI don't know what gives??

 

[Shadow1006]

The shorter one is for the 1076,1066 & 1086 probably placed in the bag by mistake...the numbers for those are
scematic part #60 - Factory Part #902970000 $20.40 X RECOIL SPRING GUIDE ASSY

There are mostly aluminum and there are some stainless steel recoil rods, I have guns with a stainless steel long for my 1006 and short for 1076.