What Older N Frame Do You Recommend?

zogger

zogger

Member
Joined
Apr 7, 2013
Messages
753
Reaction score
787
Location
Rochester, NY
I presently own a 686 6" and also a Model 60 3". I am considering my next SW purchase to be an blued N frame in .357 Magnum with a 4" or 5" barrel. While my other guns were bought new, I am leaning toward buying an older gun this time. If I buy a used gun, I'd buy it locally so I can check it before I by it. So this reduces my options to what is available locally but since I am not in a hurry, I can wait to find the right gun.

This will be a range gun not a safe queen.

Suggestions as to what model to look for?

I will also post this in the 1961 to 1980 section of the forum.

Txs!
 
Register to hide this ad
Range gun a 6" 28 (1955/56 to IIRC late 80s) or any vintage 27 from the 1935-40 Registered Magnum if you wallet can handle it; to a mid-90's dash-6; or my personal favorite a 586...... the blue steel version of the 686.



Note: the 27/28 is a larger N-frame than your L-frame 686 with a longer trigger reach...
 
Last edited:
The 28-2 is the same gun mechanically as the 27-2 and the differences are the 28-2 doesn't have the 27-2's checkered steel top strap or the 27-2's high luster blue. This was done by S&W to lower the cost of the 28-2 for sale to police which led to the name of the 28-2 being the Highway patrolman.
 
Ultimate N .357

Zogger52:
You are setting yourself up for a great experience! You have already been given some really good advice by other members of this forum. You have many choices, to arrive at your goal. You could look for the ultimate choice in N frame .357 magnums, the best looking, best trigger & action, perfect bbl. length, and good recoil absorbing weight, the S&W Mod. 27 3.5" Revolver. It is considered by many folks, myself included, to be the nearest to perfect .357 Mag. revolver in existence. You could also start with a lower grade .357 revolver, and enjoyably work your way to the top. ether way you will enjoy yourself. When you get up to the Mod. 27 revolvers, there is no bad length, and they were available in more different lengths than any other revolver that I know of. You could spend a lifetime deciding on the one best for you. Get started, and enjoy yourself.
Chubbo
 
27-2 would be great, if you can find one. I'm hoping to get a 5" myself pretty soon, but holiday expenses are getting in the way.

No one has mentioned a 27-3. Sure, you give up the pinned barrel and recessed charge holes, but mechanically they are fine and usually considerably less expensive as the collectability just isn't there. No one but an expert will know the difference watching you shoot at the range.
 
I've got a nickel 5" 27-2 for gazing at, and a 27-6 for shooting....

-2, thru -6....any of them, it's not like the endurance package benefited the .357 like it did the .44.
 
As others have said, the model 27 or 28 (Highway Patrolman).

Model 27's, particularly the 4 inch variety, are quite costly. In 95%+ condition, you're talking over a grand, probably ~1200+. The 28 is getting up there too. In like condition, they are going ~800 or so.

Here's a really cool one to look for: model 520. It's a model 28 with fixed sights. Those were only made for the NYSP in 1980, then the order was cancelled. It's a very cool gun in my opinion, and like new ones seem to go for ~900.

Now, you say you want an older one. Consider the new 'Classics' models too. While they do not have the pinned barrel or counter-bored chambers, and they do have that key lock, they are still VERY nice guns. The Performance Center makes them, so they are the best production guns you can currently get from S&W. From my own experience, the Performance Center makes VERY nice guns. Honestly, the PC guns that I've owned were TIGHTER than all the older P&R revolvers I've owned.
 
Is the .357 magnum caliber your main criteria? I ask because your 686 can handle anything an N frame .357 magnum can. I can understand if you do not want to invest in another caliber. But an N frame to me needs a caliber starting with the number 4. Don't get me wrong, I had a beautiful 5" 27-2 that I gave to my son. It had the best blueing of any S&W I have owned, and I can still look at it or shoot it whenever I want!
 
viceunit said:
Is the .357 magnum caliber your main criteria? I ask because your 686 can handle anything an N frame .357 magnum can. I can understand if you do not want to invest in another caliber. But an N frame to me needs a caliber starting with the number 4. Don't get me wrong, I had a beautiful 5" 27-2 that I gave to my son. It had the best blueing of any S&W I have owned, and I can still look at it or shoot it whenever I want!
Click to expand...

I agree. When the original Registered Magnum came out in the 30's, the metallurgy at the time required that the .357 mag pressure be contained by the thick-walled cylinder of the N-frame.

Advances in heat treating and metallurgy made the N-frame .357 with 6 chambers 'obsolete' in the functional sense. Some even point out that the heavy cylinder 'batters' itself with fast shooting prematurely.

I'd say that the N-frame is best suited to the .41 magnum or the .44 special. Full-throttle .44 magnum seems to beat up the yoke tube.
 
Another vote for the venerable Model 28 Highway Patrolman. Something about it, I don't know... to me it just has character, and public service heritage, and heft, and pointability that some more modern heavy .357's seem to lack. No offense, I love me some 686 goodness, but the 28 has a place in my heart even above the Model 27. Shooting as full house of a 158gr Magnum as you prefer out of them is a real pleasure.
 
Now that I've got all those wannahave handguns(rifles is another thing)I'm ready for a 5'' model 27.But to answer your question(this ain't my post afterall!)my answer for a totaround gun would be a 4''model 28.They come by for a small amount of $$$(compared to Mod 27)and will do more than their job.I know;I got one.
Qc
 
For an older gun,you should look for a S&W Model 610 10mm or 40 S&W.I recently acquired a 6.5 inch stainless steel and it melts my hear when I shoot it.Great gun in 3 inch and 5 inch barrels all truly worth the money.
 
You are about venture down a very expensive path because once you realize how well they handle and experience the old school double action trigger pull, you will want examples of all variations. I had to buy another 60" safe because of this. Don't worry, we'll help motivate you when you are on the fence about a purchase :)

P.S.
Every gun safe really ought to have a 6" 28 Highway. Just start there. The earlier the production the better.
 
Go 45. My favorite "N" frame shooters are my model 1917, model 1950 (pre-26) and model 1955 (pre-25). I have a real affinity for for 45acp revolvers. The 1917 is a real piece of history. I know they don't fit your criteria, but it's a mere suggestion. Any 27 or 28 with a pin in the barrel and recessed cylinder will do nicely. Good luck.
 
Last edited:
If you want to stick with 357 Mag, then a 27 or 28 are 2 great choices to look at. But if you decide to go with a -2 variant or earlier, you will be spending a significant amount of money for a good one, especially the 27's. If you go with a -3 to -5 model you will save a few hundred bucks or more and still end up with a very good revolver. I have a 6 1/2" 27-5 among my collection of 4 27's and it's just as fine as shooter as my 27-2's. And it still has the traditional checking on the top strap and not that new "so-called" checkering they are doing nowadays.

And I know you are thinking of an older model, but don't turn your nose up at a 627 in 4 or 5" barrel either. I bought a new 627 Pro in April and it has a trigger that is as nice as my older 27's. And it is 8 shot to boot. The flat sided barrel does detract from the traditional looks in my opinion, but it shoots well. And being a stainless gun, it's easier to keep clean.
 
StakeOut said:
The 3.5" Model 27-2 in 357/38
Click to expand...



For a range gun? I think a six-inch barrel is better suited, and serves well for all-round .357 use that doesn't include concealed carry. No N-frame gun is ideal for that.


Having owned five-inch and six and 6.5-inch barreled .357's, I'd choose a six-inch barrel. It seems to me to be easier to shoot well. The five-inch is a bit easier to carry, but not much. You'll never notice the difference in the right holster, except that the longer barrel may make it harder to achieve comfort during long hours in a car on patrol. But the OP isn't in that position. And tall people don't have the holster toe pressing on the seat, anyway.


IMO, the 3.5-inch barrel is always a mistake over getting a four-inch barrel. Elmer Keith and holster maker Chic Gaylord agreed. The short barreled M-27 has emotional appeal because of its brutal, stumpy appearance. But that's ALL that it offers.
 
Last edited:
Get a Model 24.

It's it's a range gun, punching big ole holes is sure satisfying!
 
Last edited:
I been hooked on the n frames with the 6" & 6 1/2" barrels. But the 4" m58 in 41 mag handles really well. The m27-2 and m28's are good choices. There also a good starting point. These can become addicting.
 
The chorus singing the praises of the 27-2 and 28-2 are correct if the .357 Magnum is your must have caliber. My 27-2 used to be a favorite range gun until I discovered the joys of the .45 ACP caliber N frame! The model 25 or 625 in any dash form with a 4, 5 or 6 inch barrel is an absolute blast to shoot. Big bore fun with reasonable ammo cost even if you don't handload.
 
You must log in or register to reply here.

Similar threads

jaydoc
What N framed models were available in 1966?
Replies
2
Views
328
jaydoc
jaydoc
Dump1567
Any guesses what this Hogue Monogrip fits?
Replies
0
Views
75
Dump1567
Dump1567
T
Presentation of my 60 “no dash”
Replies
8
Views
317
teteDeBrique
T
Max242
S&W Mod 27-9 N-Frame value question
Replies
6
Views
677
Shoebox1.1
S
3
What gun are you on the lookout for?
6 7 8
Replies
212
Views
8K
A1Oni
A1Oni

Latest posts

Back
Top