M&P15 picture thread

[mr2005]

The buttpad is a Magpul accessory.

__________________________________________________________________________________

thanks Deaj.

i see that on magpuls website. do you know if that will fit the standard stock that comes with the SW mp15? I looks like you have an upgraded stock as well.

 

[Deaj]

thanks Deaj.

i see that on magpuls website. do you know if that will fit the standard stock that comes with the SW mp15? I looks like you have an upgraded stock as well.

That pad only fits Magpul stocks. Of Magpul's stocks I think it fits the CTR, MOE, ACR, and UBR products. My stock is a Magpul CTR. It's lightweight, offers several sling mounting points (including ambidextrous quick disconnect swivel sockets), and a friction lock that keeps the stock held firmly in place at each position.

 

[speaksoftly]

Ok I'll play...

And something I came up with for fun.

 

[SAUERGLOCKS]

Here's my setup.

My Smith and Wesson M&P15.

Heres my setup:
...........................
Magpul ACS
Magpul enhanced trigger Guard
Magpul Core grip(with two extra 123 batteries for the EOTech)
M.I. Rear flip up sight
A.R.M.S. 41B Front folding sight
EOTech 516
NCStar 9x scope/laser
M.I. Quad rail
SUREFIRE Lo-pro ladder covers
Harris 6-9 Bipod with Larue mount
Aluminum 3pc vertical grip
Magpul 30 and 20 rnd Pmags

Still to come:
....................
DD Omega 7" Free float rail
Surefire lo-pro ladder covers

......................
Heres my AR after adding the Magpul ACS Stock. I love it!

Here it is with the A.M.R.S. front sight folded down aswell as the M.I. in the rear.

And here it is for those 100yrd range days.

 

[SAUERGLOCKS]

Updated my rails.

Updated with an Omega 7" free float rail. I like the thin rectanlular width and sturdieness more than my old M.I. 2pc rails. Gonna wrap it in Surefire Lowpro ladder rails, tried some Magpul XTM panels but could only get 3 on each rail due to the QR holes.

 

[Jitsu]

I liked my 15-22 so much that I could not resist buying the 15 OR big brother. Here are some pics. I love the fact that between my two rifles I can mix and match accesories. I have some other optics for both these wonderful guns that are not pictured....maybe later. Don't know why but simply love the gun in all Black. No disrespect to MOE lovers, which is also a sweet looking piece of hardware. Most of my friends think these long guns look fairly ominous in Black.

 

[Gunfighter9]

Is your front sight is on backwards?

Yes it is.

 

[Jitsu]

Yes it is.

You guys don't miss a beat. I realized it after I
uploaded the Pics and was to Lazy, tired.......etc. to change them. It was corrected after I realized it. Man can't get anything past die hard gun folk lol!
BTW here is a pic of the results of the very first rounds shot out of this baby. Man do I love this work of art called an AR15.
red dot at about 30 yds (+/-) stationary and moving. Was teaching my wife some tactical shooting skills (reason for short distance with the AR) with a .22 and 9mm as well as using my M&P 15-22. She is still not real sure of the rifle thing but boy did she love the .22.

 

[MnP4me]

Here's my M&P15 MOE

 

[jsimmons]

My M&P15 MOE:

Changes:
- Magpul CTR stock
- Badger tactical latch
- Magpul ASAP sling adapter
- CAA UPG16 pistol grip
- Magpul FVG
- Troy rear folding battle sight
- Yankee-Hill front gas block flip-up sight with sling swivel
- Smith Vortex G6-A2 flash hider

One of these days, I'm gonna get an EOTech XPS2...

 

[Guinea]

It's been a long time since I have posted on these forums. Good to be back.

My new M&P 15TS:

The only additions I have made are the MOE VFG and a BCM Gunfighter (medium latch) charing handle. I have put 1000 rounds of various brands and weights thru it so far and it's been 100%.

The Guinea

 

[ctguy1955]

M&P 15 FT

 

[Messer]

Here is what my MP-15OR turned into... (and I think I'm just about done)

Sights up...

Sights down...

Magpul MOE hand guard
Magpul ACS Stock
ERGO grip
Midwest Industries Sights
EOTECH 512
Vickers sling
BCM Gunfighter charging handle
Spikes Tactical ST-T2 heavy buffer

Take care,
Bob S.

 

[ctguy1955]

M&P15 FT

I bought mine last May and have not shot it as of yet. I sold
two pistols and a few rifles that was all used and old that I
was not using anymore and got the S+W. I then sold a 75
gallon bowfront fishtank and then a Meade ETX90 telescope
in order to get the Optics Systems. Every single item that
I have purchased for this is MADE IN THE USA and I am
very proud of that. I am in search of an American Made
Green Laser, and then the build will be complete.

I did not like the plain end with nothing on it so I bought a FCS556 and had it installed in Ma.

 

[armaliter]

CtGuy thats one fine looking Smith you got there and by the way its the first one Ive ever seen with dual headlights.

 

[Messer]

I did not like the plain end with nothing on it so I bought a FCS556 and had it installed in Ma.

So - doesn't that mod make the gun illegal to own in CT. then?

Bob S.

 

[ctguy1955]

So - doesn't that mod make the gun illegal to own in CT. then?

Bob S.

I have BATF paperwork stating that it is not a flash suppressor so its perfectly legal. I would not put myself at
risk of getting a 3K rifle confiscated.

http://primaryweapons.com/store/pc/documents/ATF_FSC556.pdf

Here is the link to the BATF letter stating its legal.

Thanks for your concern!!

 

[ctguy1955]

CtGuy thats one fine looking Smith you got there and by the way its the first one Ive ever seen with dual headlights.

Hello Armaliter,

I got a really great deal on the Surefire M951 XM07 Kit 002
and as soon as I received it bought a mod to upgrade it
from incandescent to LED using a Malkoff M-61 drop in. Now my brightness is 260 lumens and running time is hours instead of one hour using the original bulb.

The Surefire Z2-S has strobe and is only 160 lumens, and is nice to have as a backup in case something goes wrong with
my other Surefire.

I have been searching for an American made Green laser as
well and am starting to look at kits to build it myself instead
of buying ones from lasermax or Virdian or laserlyte.

 

[CBR240]

Here's mine. It's been posted on another thread here, but I wanted to be part of the picture thread.
Basic M&P15 OR
Magpul Hand Guard
MBUS popup rear sight
Yankee Hill Machine Hooded Flip Up Front sight with Rail - I really like this.
EOTech XPS2-0
It will stay like this for a whiile, as I recover from the EOTech purchase

You wouldn't believe the grief I took for my "yellow shooting mat", one friend says he is going to by me a Barbie towel for Christmas as it's obvious I have deep issues. It's just large and thick, but not cool.

 

[dennisuello]

Started life as M&P15MOE. Swapped the barrel out for a BCM CHF barrel with middy gas and Troy TRX Extreme handguard.

I also have a M&P15-22 on it's way to me.