M&P 15-22 Picture Thread

[c7aea]

that's exactly what i did, took well over an hour. getting the pin out was more difficult than i thought it would be considering how far it stuck out. measuring and lining everything up was a pain in the *** esp since i used the original hole in the stock and went to the exact depth s&w used for the pin originally with a drill press. i did take my sweet *** time though as i was afraid of totally destroying my lower. next time out when i change the stock out completely it should be faster.

we'll probably see you up at high rock soon with the 91/30.

thacheese, I was able to get mine out fairly easily with a screw extractor.

 

[Zombies]

Figured I'd post a few pictures up. My first firearm I own.

 

[stavman11]

Well

13 Mags all loaded to go PLAY tomorrow

Man..... Hope I STOP buying Stuff for this new toy....LOL

 

[TheBest]

Just picked mine up!

-M&P 15-22 with Threaded Barrel
-Magpul PTS MBUS
-UTG Red/Green Dot (not pictured)
-KZ Foregrip
-KZ Sling + Mount Combo
-Falcon Grip Plug
-Index Clips
-4x Long Magazines
-3x Short Magazines
-UTG Bag

 

[TRUST8383]

My little tack drivers...

 

[sahlomonic]

Well I think I'm done with my 15-22 "build", save for a barrel shroud. Most of you will notice a lot of HK furniture on it. I love the looks of the HK 416-22 over the 15-22, but no way would I buy the Umarex paper weight, so I imported some Umarex 416-22 parts I got on the cheap.

 

[atreyu66]

Well after seeing so many awesome looking 15-22's I decided that I couldn't live without one. Not completely finished with it yet but works for now. Hope you enjoy.

 

[grg3d]

Hi atreyu66
I love the two tone look (I'm just to chicken to do it in OD Green)
A couple of questions;

1. Is that a real Eohtech
2. What is on the forgrip? looks like a shark? gas petal?

 

[atreyu66]

No its not a real eotech, I personally am not a fan of eotech's I picked this up from someone on the cheap for now until I decide what optic I want to actually throw on it. And to answer the second question, its a handstop made by "AVE" I believe, picked it up on ebay. So far it's worked pretty well ( I only use it as a reference point for a more consistent grip) The M&P's big brother has a KAC handstop in the same place so I threw that on just to keep things consistent. Thanks again for the positive feedback.

Speaking of optics what are some options that have worked well for everyone else? I dont know that I actually want to drop several hundred on an optic, but also dont want a real piece of **** either.

 

[thacheese]

vortex optics are nice for the price and come with an unconditional lifetime warranty. mine even came with a spare battery.

No its not a real eotech, I personally am not a fan of eotech's I picked this up from someone on the cheap for now until I decide what optic I want to actually throw on it. And to answer the second question, its a handstop made by "AVE" I believe, picked it up on ebay. So far it's worked pretty well ( I only use it as a reference point for a more consistent grip) The M&P's big brother has a KAC handstop in the same place so I threw that on just to keep things consistent. Thanks again for the positive feedback.

Speaking of optics what are some options that have worked well for everyone else? I dont know that I actually want to drop several hundred on an optic, but also dont want a real piece of **** either.

 

[grg3d]

Speaking of optics what are some options that have worked well for everyone else? I dont know that I actually want to drop several hundred on an optic, but also dont want a real piece of **** either.

I have gone to the Bushnell TRS-25 for both my RRA LAR 5.56 & my M&P 15-22 with a .83 riser or 3/4" lift for an absolute co-whitiness)

Getting real hard to tell them appart now (thats why I did it )

The one I had on the M&P 15-22 was just not bright enough in a bright sunlight setting.

The Bushnell TRS-25 has 11 settings with a 3 MOA dot and its real bright.

Also its...

Water proof to 10'
It clames a 3000 hr on a single CR2032 battery
$90.00 plus $12.95 for the riser(each)
Holds zero on the RRA LAR 5.56 so I figured it would work on the M&P 15-22 too!

 

[MrBoxx]

I run the same Bushnell TRS25, but I found mine for 69.99 on Amazon. My UTG .83 riser was also ~$8. Excellent sight.

 

[atreyu66]

Awesome thanks for the info I will definitely check that one out. The other one I was looking at was the PA 1-4X illuminated. anyone used that?

And to keep the post legit

 

[deftronix]

Really love that performance center barrel, wish they would sell them separately..

Here is where mine is currently:

Duracoated it German Flecktarn Brown

Mods/Addons:
KAC micro flip up sights
LaRue SPR-1.5 QD scope mount
Nikon Monarch 3-12x42
Daniel defense rail & rear sling mounts
VLTOR modpod
Viridian C5L
Magpul ACS w/ .7" butt-pad & QD sling mount
Magpul AFG
Magpul MS2
Ergo Grip
JP yellow springs
Gripp magtabs
Beltfed shroud & extended charging handle

 

[gotfish]

Really love that performance center barrell, wish they would sell them separately..

Here is where mine is currently:

Duracoated it German Flecktarn Brown

Mods/Addons:
KAC micro flip up sights
LaRue SPR-1.5 QD scope mount
Nikon Monarch 3-12x32
Daniel defense rail & rear sling mounts
VTLOR modpod
Viridian C5L
Magpul ACS w/ .7" butt-pad & QD sling mount
Magpul AFG
Magpul MS2
Ergo Grip
JP yellow springs
Gripp magtabs
Beltfed shroud & extended charging handle

Love this! Would like to see more pics if you have 'em!

 

[unethikl]

[/QUOTE]

Hello guys,

what brand awp rifle is the last one?
is it a airsoft? or the actual thing?
308win maybe?

 

[stavman11]

Hello guys,

what brand awp rifle is the last one?
is it a airsoft? or the actual thing?
308win maybe?[/QUOTE]

HOLLY ****


Umm... dont they have Meetings for ADDICTS like you


Heck... Im only in for like 1 month... and ALREADY on my 2nd Gun..... well it WAS for the wife mind you

 

[TRUST8383]

Some one had already asked me about the rifle earlier in this thread. Here is the quick details...

Thanks Ted...I don't wanna go too far off topic for this thread. But a quick run down...It's a remington 700 AAC-SD .308 with a 20" bbl 1:10 twist, AAC brakeout compensator that mates with an AAC 762 SDN-6 Suppressor. The stock is an AICS 2.0 chassis with some bolt work from SSG, and a Timney 2.5lb trigger. Badger 20moa base & rings, Night Force 3.5-15x50mm mil rad scope. Harris bipod.

If you have any questions, feel free to PM me.

 

[TRUST8383]

Thanks TRUST8383 for your reply!!

Searched around for prices; oh boy, AI stock costs more than everything else combined, excluding the scope

Are there any 22LR that has AWP looking stock?

I'm a 22LR maniac b/c of ammo prices.

If you have a 10/22, you could build this...

Rhineland arms

15-22 picture thread.

AAC pilot 2 on my 15-22

and video of how it sounds with bulk ammo.

Smith & Wesson M&P 15-22 with AAC PILOT 2 - YouTube

Will try out some sub-sonic ammo next time out.

 

[grg3d]

The Twins...Finaly

HI Again…here is an update of my Z.O.R.T. weapons
Of course there is a few differences between them but here is a look….

The both have the same hand guards and pistol grips
M&P 15-22

RRA LAR Operator 2 5.56

Both have the same pistol grips (close up)

M&P 15-22 Take down pins

RRA LAR Operator 2 5.56 Take down pins & ejection port cover

RRA LAR Operator 2 5.56 charging handle

And both have the Mag release piece

And a Side by Side Comparison

Really...almost done except...

The charging handle for the M&P 15-22, I want the one from tacticool the one made from aluminum (hope I can get it engraved like the 5.56's) & the B.A.D. lever for the M&P 15-22

Now where are those Zombies....