I am hoping lock equipped version will be released for these.
Not a fan of deleting safety features. Those with little ones will understand.
I am afraid to post anything here, but the Lipsey’s Aim Higher podcast from SHOT will answer a lot of questions.
I would love to know what the trigger pull weight is on these guns. The videos I've seen don't mention it.
I have bought 3 of the newer alloy J frames and they all have decent triggers. No noticeable difference from my older ones. But as long as they are smooth with no hitched I don't worry that much about it as long as I can keep the sights in line as I pull the trigger. They are not target guns in the first place. Minute of paper plate at 15 yards works for me
Interesting. It won't do anything the 38+P can't do and I could care less about the sights because when the poop hits the fan, you won't even use them anyway.
Interesting. It won't do anything the 38+P can't do and I could care less about the sights because when the poop hits the fan, you won't even use them anyway.
I do find the cynical grumbling perplexing. An improved version of one the most timeless carry/back up guns is released and some seem annoyed by it. Not to mention one of our forum brothers was integral in getting this project to fruition. The firearms community really is its own worst enemy at times.
As far as the useless frame lock goes I’m glad to see it omitted. Another way to secure a revolver is a set of hand cuffs secured to frame so that the cylinder cannot close. Before the small handgun safes were ubiquitous this was my go to method. When traveling I’d request a room with an ADA bathroom with the big stainless steel hand rail. Locked to the rail with a pair of men’s under wear draped over it. Who wants to touch a guy’s underwear?
Interesting. It won't do anything the 38+P can't do and I could care less about the sights because when the poop hits the fan, you won't even use them anyway.
I don't think anyone can really dispute that the .32 H&R Magnum will have much less recoil and faster follow-up shots as compared to .38 Special +P. Plus you get an extra round with the .32 H&R Mag. (6 rounds vs 5 rounds)
As for the sights, I think you're right when it comes to the proverbial fan scenario.
Can't dispute the lack of factory ammo options and availability. Then there's the OVER a $1 per round for each round compared to $0.33 per round for 38 Special. One cylinder of 32H&R will cost almost $7 compared to $1.65 or so with 38 Special. A hundred rounds of 32H&R will cost over $100, whereas a box of 100 of 38 Special is $33. Seems like a revolver/caliber that would rarely be shot at the range.
Next, the fact that there are 38 Special 90 and 110 grain NON +P rounds that have similar velocities and muzzle energy compared to .32 H&R. There are 38 Special rounds that are explicitly engineered to have less recoil and muzzle flash. There's a huge variety and spectrum of 38 Special offerings, so I don't understand the argument with regards to recoil. Plus, it's not doing anything impressive or necessarily special in the ballistic performances department.
Lastly, the .32H&R and 38 Special revolver offerings are the same size and weight. It's not like the smaller caliber offers any advantages in that regard either.
Seems like there are a few cons and only one pro which is the one extra round that comes with the .32H&R offerings, but you're giving up a lot to have that extra round. IMHO, S&W blundered in not chambering it in 327 Mag instead with the option of firing .32H&R. I just don't see it selling well after the initial small motivated minority purchases one. I'm glad they made it for those who want one, but I'd caution you all to get them while you can because they maybe hard to find and/or will be discontinued in the future. There's a very small niche market for .32H&R, and I highly doubt S&W will set aside a machines and manufacturing slots to bring many to the market over the more popular and better selling 38 Special Centennials.
I think the points you made are spot on, valid, and well said. Much appreciated.
I still plan to buy the Lipsey's J Frame edition chambered in the .32 H&R Mag, if I can't find a reasonably priced 431pd or 432pd in excellent to mint condition.
Can't dispute the lack of factory ammo options and availability. Then there's the OVER a $1 per round for each round compared to $0.33 per round for 38 Special. One cylinder of 32H&R will cost almost $7 compared to $1.65 or so with 38 Special. A hundred rounds of 32H&R will cost over $100, whereas a box of 100 of 38 Special is $33. Seems like a revolver/caliber that would rarely be shot at the range.
Next, the fact that there are 38 Special 90 and 110 grain NON +P rounds that have similar velocities and muzzle energy compared to .32 H&R. There are 38 Special rounds that are explicitly engineered to have less recoil and muzzle flash. There's a huge variety and spectrum of 38 Special offerings, so I don't understand the argument with regards to recoil. Plus, it's not doing anything impressive or necessarily special in the ballistic performances department.
Lastly, the .32H&R and 38 Special revolver offerings are the same size and weight. It's not like the smaller caliber offers any advantages in that regard either.
Seems like there are a few cons and only one pro which is the one extra round that comes with the .32H&R offerings, but you're giving up a lot to have that extra round. IMHO, S&W blundered in not chambering it in 327 Mag instead with the option of firing .32H&R. I just don't see it selling well after the initial small motivated minority purchases one. I'm glad they made it for those who want one, but I'd caution you all to get them while you can because they maybe hard to find and/or will be discontinued in the future. There's a very small niche market for .32H&R, and I highly doubt S&W will set aside machines and manufacturing slots to bring many to the market over the more popular and better selling 38 Special Centennials.
Can't dispute the lack of factory ammo options and availability. Then there's the OVER a $1 per round for each round compared to $0.33 per round for 38 Special. One cylinder of 32H&R will cost almost $7 compared to $1.65 or so with 38 Special. A hundred rounds of 32H&R will cost over $100, whereas a box of 100 of 38 Special is $33. Seems like a revolver/caliber that would rarely be shot at the range.
Next, the fact that there are 38 Special 90 and 110 grain NON +P rounds that have similar velocities and muzzle energy compared to .32 H&R. There are 38 Special rounds that are explicitly engineered to have less recoil and muzzle flash. There's a huge variety and spectrum of 38 Special offerings, so I don't understand the argument with regards to recoil. Plus, it's not doing anything impressive or necessarily special in the ballistic performances department.
Lastly, the .32H&R and 38 Special revolver offerings are the same size and weight. It's not like the smaller caliber offers any advantages in that regard either.
Seems like there are a few cons and only one pro which is the one extra round that comes with the .32H&R offerings, but you're giving up a lot to have that extra round. IMHO, S&W blundered in not chambering it in 327 Mag instead with the option of firing .32H&R. I just don't see it selling well after the initial small motivated minority purchases one. I'm glad they made it for those who want one, but I'd caution you all to get them while you can because they maybe hard to find and/or will be discontinued in the future. There's a very small niche market for .32H&R, and I highly doubt S&W will set aside machines and manufacturing slots to bring many to the market over the more popular and better selling 38 Special Centennials.
What a post. Your cost comparisons are not apples to apples. 38 special LRN on ammoseek is about 35-40 cents per round. Legitimate self defense ammo is $1 per round if you can find it (Federal HST is the only 38 spl SD load I would ever use).32 long LRN is also 35-40 cents per round. 32 H&R mag SD ammo is also $1 per round. Very similar costs for the 32 and 38 range/SD offerings.
You clearly don’t own or shoot 32 of any variety. A 32 long wadcutter is a cream puff compared to a 38 spl wadcutter.
I have a 32 H&R Bisley Ruger, a 432PD, an H&R 32, and multiple 32 hand ejectors including a couple Reg Police guns. New shooters, females, my wife, and my buddies all enjoy shooting these guns immensely. Perhaps Smith and Wesson is heading down the road to rehydrate the 32 caliber in modern times.
10mm was written off too for quite some time because “what does is do better than insert another caliber here”. Now look at the market demand, Glock just released a Glock 29 gen 5 due to demand!
SVT28