1006 Impressions

srouse2822

Member
Joined
Oct 5, 2010
Messages
5
Reaction score
0
Location
SW Florida
Hi there,

I am VERY VERY new to this site. I have posted a few pics of a 1006 that I was thinking of buying. It has 3 Mags the wood grips and the Galco holster.

Can you take a look see if it looks like its in good shape and also what do you think a fair price would be for this firearm.

I know its a bit hard to tell I just want some people who have some experience to weigh in. I have no no no experience with Smith and Wesson....

I do have experience with HKs and Sigs just never looked into Smith untill now

THANKS
Scott
 

Attachments

  • 1006a.jpg
    1006a.jpg
    54.9 KB · Views: 205
  • 1006b.jpg
    1006b.jpg
    53 KB · Views: 187
  • 1006c.jpg
    1006c.jpg
    52.5 KB · Views: 169
  • 1006d.jpg
    1006d.jpg
    55.4 KB · Views: 164
Register to hide this ad
Hi there,

I am VERY VERY new to this site. I have posted a few pics of a 1006 that I was thinking of buying. It has 3 Mags the wood grips and the Galco holster.

Can you take a look see if it looks like its in good shape and also what do you think a fair price would be for this firearm.

I know its a bit hard to tell I just want some people who have some experience to weigh in. I have no no no experience with Smith and Wesson....

I do have experience with HKs and Sigs just never looked into Smith untill now

THANKS
Scott
My area that would be a $600 to $700 set if it's not rough under the surface. Looked at a very nice one last month that was a beauty and it was $550 with one magazine and no box or holster, it looked almost new. If I would have had the CC's with me it would have come home with me.
 
The general market in these guns is in the $6-700 range, depending on condition and what comes with it. The Houges will make the grip feel more like a double stack than the original plastic grips did. Depending on how it fits you hand, that may not be a bad thing. The gun shown appears in good shape from what I can see in the pictures. Hard to tell for sure long distance. The finish should be a matte or beadblast finish. If not, it's been cleaned up with a scotchbrite pad. Mechanically, it's hard to hurt a 3rd generation S&W. The 10mm is a very high intensity round, a magnum of sorts. If you buy the gun, order a new recoil spring and install, just to be sure you have enough spring to keep from damaging the gun with full power loads.
 
I bought mine for $600 with 3 mags ,hogues grips and a holster, this beauty its a keeper
 
Smith 10mms'

I at one time had a 1006, 1076, & a 1086! They were all second hand purchases and every one of them WORKED! Between $500-$700 sounds about right, and new springs are a must! The 10mm has a reputation for eating guns that chamber it!
But it is a beautiful long range cartridge that is capable of taking deer! And yes they are addictive!
 
I believe $600 should be your target price if the internal/external condition is excellent. If not, adjust up or down based on condition and extras such as original box, manual, cleaning tools and extra magazines. Most semi-autos come with an extra magazine so adjust the price for 3 or more. There are six different S&W 3rd Gen 10MM pistols. Three with a 5" barrel--1006, 1026, and 1046 and three with the 4 1/4" barrel--1066, 1076, and 1086. Of these, the FBI issued 1076 and the 1046 will bring premium prices. Right now, good deals can be found for the others.
 
Last edited:
Hi there,
I can't speak for price ranges or values, but the 1006 is a good pistol, although not to be compared with good modern 1911s or similar pistols.
It just has a good "fun factor", but even if i'm going to be yelled at, the 10mm just seems to disappear step by step, so i tried to sell my 2 Model 1006s and just 1 went in 8 months and one came back. Hell, i'm glad i got that one back, now!
Because i get myself to load the 10mm again (after blowing the dust of the reloading dies :-) and found it really amusing.
Contrary to ALL my reloads, which i download to preserve guns and shooting fun, i just wanted to know how much "magnum" the 10mm is or can be, as often referred to in magazines or the net.
Right from the start, reloading the 10mm compared to the good old .45, gives you the sense of a better yield, it just fills up perfectly with powder and the big bullets stucks good and straight. But that's only an opinion, because i love to reload the .45 :-)
To start with came a reload of 14gr of AA Nr.9 behind a 170gr FMJ bullet and CCI300 primers, which relaoding books give at more or less 1300 fps, not bad in comparison with a .357 MAG. On the ride was a box of (20) Winchester 175gr Silvertyp ammo, too.
Ok, both surely bangs loud with a pretty flash, but it aint no "MAGNUM", not in the 1006, which recoils about the same or less than a 1911 with a standard 230gr ball, so it appears to me !
In fact, after shooting a Model 19 with 158 gr Magnums recently, i thought it was more pleasant with the 10.
However, when i changed to a Glock 17 short after the session with the 1006, the Glock 17 seems to be a popgun. So indeed, recoil IS REALLY very subjective.
Back to the 10, i have to say, that although the Winchester ammo gaves signs of good pressure when looking at the cartridge cases, the primers looked good.
My reloads however (also Winchester cases), had flattened primers! I did not overcrimp or put the bullet to deep!
The gun worked flawlessly, spending cartridge cases straight back a few feet to the right. I forgot to mention, that the gun was upgraded with the Wolff 22 lb mainspring along with it's firing pin spring.
Accuracy, although not olympic and way form a LB or S&W PC Gun, was pretty good with groups of 4-5 inches @ 25 yards with both loads.
Whatever, i had fun shooting the 10 and will try other loads in the future. The original plastic grips are fine, the ambi safety does make the slide a little cumbersome, but ... if you have a 1006, keep it, if you can get one for a good price, take it. You can't have enough guns, can't you?
Steve
 
The 1006 was/is a kicka@s gun. Try shooting the 1911 Colt Delta Elite
with full power loads and watch the frame crack...LOL I highly doubt the Glock 20 could handle a steady diet either...LOL
The only reason I ever sold mine was that the 10mm factory loads ammo market dried up with the introduction of the 40S&W(Short & Weak).
It's a real shame since the 10mm cartridge was ahead of its time.
Just look at the old D&D's Bren Tens's.
Honor and worship the 1006, for it really is a superb weapon.
 
The 1006 is a reliable and durable hunk of steel and about as accurate as anything that I have shot.
 

Latest posts

Back
Top