Equalizer S&W45
Member
To anyone who owns a .35 Remington and loads it for a Marlin 336 lever-action,I'm seeking load data using IMR3031 and a Hornady 200 grain RNSP.Thank you in advance for any replies.
Equalizer
Equalizer
.35 Remington load info needed.
- Thread starter Equalizer S&W45
- Start date
Register to hide this ad
lots of .35 info on the marlin owners forum
Hobie
Member
Start with 30 gr. and work up to about 32-33 gr. IMR 3031.
shovelwrench
Member
OP
Equalizer S&W45
Member
Thanks everyone for the help,I'm getting ready set down and load some virgin .35 rem(Winchester)brass with the 200 grain Hornady RNSPs for a new Marlin 336 topped off with a 1.5-5xLeuopold.Its mainly going to a hog gun and a deer rifle on long stalking hunts were shots will be anywere form 15 yards to 80yards.Thanks again!
Equalizer
Equalizer
Skip Sackett
US Veteran
Equal,
I do load for the 35Rem just not with that powder. I use Varget though and that at the maximum listed weight for the bullet. Good results from a friend that owns the rifle.
Hope this helps!
I do load for the 35Rem just not with that powder. I use Varget though and that at the maximum listed weight for the bullet. Good results from a friend that owns the rifle.
Hope this helps!
OP
Equalizer S&W45
Member
Skip,
I appreciate the reply.I don't have any Varget on hand or seen any in about 5 months.I'll let you know how things turn out with IMR-3031.I'm supposed to have some 200 grain.358 FTX componets coming sometime this week,I'll update you on those as well when I get some loaded and get time to shoot.Thanks again.
Equalizer
BruceM
Member
Another powder you might consider and that I've have pretty good luck with is W748.
Bruce
Bruce
Gatorbaiter
Absent Comrade
A very accurate load that has caused the demise of several Texas deer in my Marlin 336 Carbine is 41.0 gr. of H322 behind the Hornady 200 gr bullet.
bagolden
Member
+1 for the Marlinowners site. Search 35Remington's posts on heavy loads for the .35. I've been using some of his data and been pleased. How does 2200 fps out of a 20 inch barrel sound? He uses several powders but it seems he likes H4895 for the heavy stuff.
OP
Equalizer S&W45
Member
Guys thank you all for the input,I have Win-748,H-322 and 4895 on hand and will try those also if I'm not happy with 3031 under the 200 grainer.Thank you all!
Equalizer
Equalizer
I use Speer reloading data, IMR 4895 powder and the rifle's owner is delighted with the results.
Similar threads
