I do not understand the concern. Carry the Mod 19 and you can shoot both .357 and 38spl. Load 38 if in close spaces and carry 357 if in more open areas.
.38 Special or .357 for EDC
- Thread starter Rocketmedic40
- Start date
OP
This is what I ultimately decided to do, we upgraded the safe last week and I had more pistols than room for pistols, so I consolidated the 19-3 and the 64-8 into a single 65-4 and a nice bit of cash that pays for other things later on, because there was some fairly obvious duplication in revolvers lol. I’ve still got the -65 and a pair of Model 10s before I even touch snubbies or not-.38s
Looking for an N-frame 27 or 28, maybe a Security Six or other Ruger, maybe .44? Idk. I’ve got a lifetime of hobby to enjoy, got to pace myself.
If anyone’s looking for a nice Model 19-3 or 64-8 in the Austin area, they’re at Livengoods in Lockhart, very fairly priced (I think Brian has the 19-3 at $649, the Model 64 at like $400?
Sal1950
Member
Can you say Fort Polk's Leesville Louisiana
I carry a 2.5” 686, and I carry Buffalo Bore 158gr low flash .357 Magnum ammunition.
In the past I have carried Privi Partizan 158gr JHPs, which achieves a muzzle velocity of 1500fps out of a 10” test barrel. I could shoot it quite accurately double or single action (easily out to 25 yards), but it was a bit much out of my gun (in fact, the recoil was so severe the left hand grip medallion rotated from the firm grip of my right thumb on it combating the recoil), and I ultimately decided that Buffalo Bore load was a better compromise because of the quicker follow up shots and lower muzzle flash in low light.
In the past I have carried Privi Partizan 158gr JHPs, which achieves a muzzle velocity of 1500fps out of a 10” test barrel. I could shoot it quite accurately double or single action (easily out to 25 yards), but it was a bit much out of my gun (in fact, the recoil was so severe the left hand grip medallion rotated from the firm grip of my right thumb on it combating the recoil), and I ultimately decided that Buffalo Bore load was a better compromise because of the quicker follow up shots and lower muzzle flash in low light.
I’m thinking of selling a pair of relics. model 60 (no dash) 2” stainless in 38 and a 10-8 HB 4”
Attachments
Zeke38
Member
- Joined
- May 3, 2025
- Messages
- 23
- Reaction score
- 17
Want to tell you about High Desert Cartridge Co. out of Oregon. Owner is a former cop and loads some cool 38 wadcutter loads and a 357 load meant for two legged varmints. The 357 load is a
158gr Hornady XTP JHP and it is doing 925 out of a 2" barrel. Very accurate, controllable, low flash and expanding. Reasonable price. I'm putting mine in my HD 357s. The wadcutter load 148 grain at 750fps. Running these in J frames.
158gr Hornady XTP JHP and it is doing 925 out of a 2" barrel. Very accurate, controllable, low flash and expanding. Reasonable price. I'm putting mine in my HD 357s. The wadcutter load 148 grain at 750fps. Running these in J frames.
Last edited:
Lance Boyle
Member
- Joined
- Jul 15, 2012
- Messages
- 134
- Reaction score
- 123
I admittedly carry a Glock 43x most of the time in town. If I am woods bumming I may grab a six gun.
My philosophy is to stick with .38s in a short barrel. Only when you start up around 3 inche barrel lengths I don’t hate a .357 blast. For me personally I wouldn’t bother putting .357 in a short barrel or an alloy or titanium gun. I just don’t want to shoot it.
It’s all moot for me though. All my six guns are 4” or better and my two small guns are the 43x and a Kahr MK40 that I wish I got the 9mm version in. It’s a heavy little gun but I shoot it well.
I can’t handle Snubs shooting 357. There was a time that’s all I shot. Those days are gone. 38 +P from my new 817 Taurus was easy to handle and be accurate with. Les recoil and Les noise. 7 shots in my 817 in the waist. 5 shots in my pocket J-Frame plus reloads, if that isn’t enough I guess I’ll see you on the other side 
I carry the Speer 135 grain short barrel load in .357 and the Hornady Critical Defense110 grain FTX non plus P in .38.
BLACKHAWKNJ
Member
- Joined
- Oct 25, 2006
- Messages
- 6,186
- Reaction score
- 6,616
Skeeter Skelton was quite enamored of the 2.5' M-19 when it was introduced in 1967, later changed his mind, cited muzzle blast and flash, found a 4" no harder to conceal. Jeff Cooper noted all the magna need a long runway to get up to speed-the 357 was originally developed in a 8 3/4" barrel
and Cooper found the pre-war 357 was loaded much hotter.
A Hit with a Minor Caliber hurts much worse than a Miss with a Major. I am a Charlie Askins fan (Yes !!),
IIRC he carried a Colt New Service in 38 Special during his Border Patrol and WWII service.
and Cooper found the pre-war 357 was loaded much hotter.
A Hit with a Minor Caliber hurts much worse than a Miss with a Major. I am a Charlie Askins fan (Yes !!),
IIRC he carried a Colt New Service in 38 Special during his Border Patrol and WWII service.
Last edited:
A good compromise...The often overlooked and underrated Smith ..... The Model 12 2 inch.
IMHP received a bad rap concerning cracked frame.
Been on this forum near 22 years....seems I recall in the early days one of
our members TRIED to break one....IIRC correctly, he stopped the test at some
ungodly round court...nary the slightest sign of a crack.
This one I recently retired after picking up another one from a forum member gun show bud.
IMHP received a bad rap concerning cracked frame.
Been on this forum near 22 years....seems I recall in the early days one of
our members TRIED to break one....IIRC correctly, he stopped the test at some
ungodly round court...nary the slightest sign of a crack.
This one I recently retired after picking up another one from a forum member gun show bud.
I believe the question is which round is better suited for EDC...38 Special or .357 Magnum. Forget the guns (I love my Model 19, and also my Python), the OP is asking which round is best suited for a self-defense, carry gun. We are all different and have different situations, strengths, weaknesses, etc. So, we will never have one, simple answer to that question. However, I like to look back because history is a great teacher. An awful lot of bad guys have been dispatched by both LE and military with the anemic 158 grain LRN (or FMJ) .38 Special since it was introduced in 1898. Human physiology hasn't changed during that time. A .38 slug that would kill a bad guy during the roaring-twenties, will kill a bad guy today. So, if the .38 Special was always so effective, why was the .357 Magnum developed? Simple answer...automobiles. Gangsters were driving automobiles during the thirties that were made of thick, heavy, American steel. The doors had an outer steel shell, a thick piece of glass inside (assuming the window was down which it would be if the bad guy was shooting at you), iron and steel inside for the window crank assembly, and a steel inner shell. A gangster, shooting at you through that open window with a rifle, shotgun, Thompson .45, etc., with the door as cover was not an easy stop with a .38 Special handgun. The .38, punching through all that steel and glass, had ran out of steam by the time it go to the criminal's vitals. So, the .357 Magnum was developed. Not only could it punch through the doors better, but it could also get through fenders, tires and wheels, and put a big hole in a cast-iron engine block, taking the car out.
What is the lesson that I take from this? To me, it dictates my preferences in SD guns. I carry a Model 36, in my pocket, or in an IWB holster, stoked with the best, modern +P ammo I can find. I can shoot it well, and know I can put five rounds into a bad guy at expected ranges (within 15 yards). I have no doubt that this gun, and round, will adequately put a bad guy down. The 2" barrel is not as long as the barrels that put most of the bad guys down thru history, but today's ammo more than makes up for that difference. In the instance that I am in my car, and face a car-jacking, road-rage incident, etc., (need power to punch thru a car or have more than one target), I'm carrying a 1911 in my dash with at least one extra magazine. However, a .357 Magnum revolver with a couple of speedloaders would accomplish the same thing.
In a nutshell, on my person, I go lightweight with a gun and round that has proven itself for over 100 years as an adequate manstopper. In my vehicle, I carry a little more because I might have to do a little more.
What is the lesson that I take from this? To me, it dictates my preferences in SD guns. I carry a Model 36, in my pocket, or in an IWB holster, stoked with the best, modern +P ammo I can find. I can shoot it well, and know I can put five rounds into a bad guy at expected ranges (within 15 yards). I have no doubt that this gun, and round, will adequately put a bad guy down. The 2" barrel is not as long as the barrels that put most of the bad guys down thru history, but today's ammo more than makes up for that difference. In the instance that I am in my car, and face a car-jacking, road-rage incident, etc., (need power to punch thru a car or have more than one target), I'm carrying a 1911 in my dash with at least one extra magazine. However, a .357 Magnum revolver with a couple of speedloaders would accomplish the same thing.
In a nutshell, on my person, I go lightweight with a gun and round that has proven itself for over 100 years as an adequate manstopper. In my vehicle, I carry a little more because I might have to do a little more.
Last edited:
