CLP, but SOME have ammonia. Ballistol is good. Others I would try are Wipeout Foaming Bore and SC-14.
Anyone have their revolver reblued at the S&W factory lately?
- Thread starter Dbrazeal77
- Start date
Drem
Member
- Joined
- Oct 20, 2014
- Messages
- 30
- Reaction score
- 21
I sent S&W my 15-4 back in March before I found out they changed their bluing process. When I received the letter with the cost I decided to go with the bright polish in hopes that I will be happy with the end result.
I called last week and it is supposedly being processed. Waiting each day now to see the charge come through my bank.
I called last week and it is supposedly being processed. Waiting each day now to see the charge come through my bank.
b737lvr
Member
- Joined
- Jan 31, 2025
- Messages
- 147
- Reaction score
- 403
It's going to be a while, have patience and just wait.
Thanks. Got to poking around in the junk box and found a can of MC-7 that says 'ammonia free' right on the label...duh.
Jcon72
Member
IMO this should be completely unacceptable! Both products are commonly used for gun cleaning, and they need to find a consumer-friendly solution for the bluing process. Don't 3rd party gunsmiths do (better) bluing jobs all the time without the limitation of not being able to use Hoppe's #9 or ammonia?
kbm6893
Member
I agree. A gun that can't be cleaned using Hoppes #9 is not acceptable. Not to mention most people don't even know that Hoppes has ammonia. Most start up gun cleaning kits in the sporting goods stores have Hoppes #9. The cleaning kit that I was issued in the police academy was a Hoppes #9 kit.
Malkovich
Member
- Joined
- Jan 23, 2021
- Messages
- 81
- Reaction score
- 85
Did you ever get a price from S&W?
Malkovich
Member
- Joined
- Jan 23, 2021
- Messages
- 81
- Reaction score
- 85
That's bad to the bone !
Drem
Member
- Joined
- Oct 20, 2014
- Messages
- 30
- Reaction score
- 21
I sent my 15-3 in earlier this year. While it was still waiting its turn I learned here that they changed their process. Not sure how the standard polish and bluing would look I decided to upgrade to the high polish in hopes I would be happy.
I got it back last month and to me I can see that it is "blacker" than my 586 but with the high polish I am quite happy.
Yeah I wish it had the same look as the day I bought it NIB. But as awful as it looked after the police recovered it I'm glad she is nice and shiny again.
I got it back last month and to me I can see that it is "blacker" than my 586 but with the high polish I am quite happy.
Yeah I wish it had the same look as the day I bought it NIB. But as awful as it looked after the police recovered it I'm glad she is nice and shiny again.
My gunsmith has sent several firearms to Hot Flash Refinishing, they do an excellent job.
SITREP: I went with the high polish blue, $283. FedEx says it should be in my hands today. That is exactly 3 months from the day I shipped it to S&W. As usual, Will Report, w/photos. RECON by fire to follow.
SavannahSteve
Member
- Joined
- Oct 8, 2020
- Messages
- 7
- Reaction score
- 12
A couple of years ago, I bought a new Taurus Model 82 38 spl that came with an ugly matte black finish that is not very durable. I have had all of the visible parts refinished in a glossy black Cerakote. The gunsmith also grooved the front sight ramp and filled it with red cerakote.
While it is not as pretty and glossy as an original blued Smith& Wesson, I am very satisfied with the result and now have a very durable finish to boot.
While it is not as pretty and glossy as an original blued Smith& Wesson, I am very satisfied with the result and now have a very durable finish to boot.
Please post pics!!
My gun show partner took possession of the gun before I could take pictures. I'll get him to send me a couple pics today. It looks pretty good, especially concidering how bad the gun looked before I sent it off.
I have a G.S.P. 28-2 coming home now from S&W. I will make a point of photographing it as well when it arrives.
S&W's current re-blue of a 19-3. They applied NO rework marks.
One more. That spot below the logo wipes off.
I bought a 586 that needed a lot of care. I reworked the action and sent it to S&W for a refinish. When it came back, I could not believe how nice it looked. They did a fantastic job. It was done several years ago.
I would be very happy with that!
Superb job.
Turn around is about 2 1/2-3 months.
Zippo Guy
US Veteran
- Joined
- Dec 24, 2009
- Messages
- 55
- Reaction score
- 21
Ditto, that looks great.
I think they call this the brushed blue? Anyway, I wanted it nickled which they don't do anymore, and the CR told me their current high polish will not match the exquisite late-60's polish, so I picked the brushed. Looks OK.
This M10 BTW came out of Puerto Rico. Came to me with a set of aftermarket grips that wouldn't tighten. I swapped them for the J Scotts and T-grip. Had the typical late '70's bizarre combination of excellent action and a B/C gap you could slide a butter knife blade thru. They set the barrel back and fixed that, also.
This M10 BTW came out of Puerto Rico. Came to me with a set of aftermarket grips that wouldn't tighten. I swapped them for the J Scotts and T-grip. Had the typical late '70's bizarre combination of excellent action and a B/C gap you could slide a butter knife blade thru. They set the barrel back and fixed that, also.
Attachments
Rust E. Badge
Member
- Joined
- Jun 24, 2016
- Messages
- 95
- Reaction score
- 212
G.S.P.? Georgia State Patrol?
Yes, GSP Ordered their guns through Paris Dunlap Hardware Co. of Gainesville, GA, shipped March 27, 1972. There were 25 28-2's in the order. I should have it in hand tomorrow. Will report (with photos).
Major 2
Member
Major 2
Member
Ballistol
I have a bit of trouble seeing why Hoppes would cause color change to the current blue process. At any rate, Ballistol apparently also includes ammonium oleate which was cited above as being the culprit in the color change. So I do not see how it would be any safer than Hoppes IF ammonia causes the color change.
Ballistol vs WD40: Are Ballistol and WD-40 The Same?
It seems that the two products, Ballistol and WD40 are basically the same but they have different ingredients. They both penetrate and lubricate at the same
thecampingadvisor.com
See attached.
(The "EVR" solvents are just that, solvents only. They are amyl acetate-based nitro solvents of my own concoction. Not for rust/corrosion protection, obviously. I'm working on a combination solvent/corrosion inhibiter).
Attachments
To me that looks fantastic! S&W does some excellent work. I have sent semi-autos and revolvers and they have all come back looking brand new!
Major 2
Member
from their own home page
IS BALLISTOL SAFE ON NICKEL/CHROME/GOLD LEAF?
Yes! Ballistol is safe on all metals when used as directed. There is the potential with any creeping oil to "lift" metals plated by electrolysis, but our product is simply not capable of deteriorating these metals. We recommend when using Ballistol on electro-plated metals (gold leaf, nickel, chrome, etc.) to wipe off any excess Ballistol after cleaning. Ballistol should not be used on these surfaces if they are scratched or damaged.
I have no dog in the fight.
IS BALLISTOL SAFE ON NICKEL/CHROME/GOLD LEAF?
Yes! Ballistol is safe on all metals when used as directed. There is the potential with any creeping oil to "lift" metals plated by electrolysis, but our product is simply not capable of deteriorating these metals. We recommend when using Ballistol on electro-plated metals (gold leaf, nickel, chrome, etc.) to wipe off any excess Ballistol after cleaning. Ballistol should not be used on these surfaces if they are scratched or damaged.
I have no dog in the fight.
Similar threads
