M&P-15 22 Accessories

"IM" Bret248Vista here or go to you tube and see his tacticle scope videos. He has the NC Star rig you are asking about. The price is right inline from what Ive seen everywhere. I would say its a average price.
 
Last edited:
I have that scope/red-dot combo. I've only used it for plinking at the range out to 100yds, but I've been very pleased with it. The red-dot basically just sits on top of the scope, no co-witness between them. I have the red dot zeroed in at 25 yds and the scope at 100yds. For me the red dot isn't much use past that (covers too much of the target), but the scope reaches out to 100 yds nicely.

My only "complaint" would be that with the red-dot sitting on top of the scope it seems like it would be easy to get snagged on something and break off. Also, the on/off switch for the red-dot seems pretty flimsy. Not a deal-breaker for me, just fyi.

I think Amazon has a better price: Amazon.com: Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package: Electronics

(not sure if I can post a link or not - if that didn't come through just search on amazon for "Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo". Note that the picture they have for it does not show the red-dot, but it does come with the combo.
 
Quote: I think Amazon has a better price: Amazon.com: Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package: Electronics

I agree. That's where I got mine. For the price it's a pretty sweet setup.

BTW the red dot is detachable if desired and I really like the lever lock mounting system that this scope has.
 
dogg1er said:
does any one use a Mark III Tactical 3-9x42 mil dot scope with the red dot combo? if so can you tell me how it works for you. and how does the scope work with the red dot? please any info would be great. this is the one i am referring to.

Mark III Tactical 3-9x42 Mil-Dot Scope Adaptor Mount w/ - eBay (item 160581923897 end time Jun-30-11 20:35:35 PDT)

also is this a descent price for this scope? thanks for your help.
Click to expand...

I run that scope, but with a separate NcStar reflex sight on a 45 degree mount. It's a good scope, but I find that I have to get real close to it to get a good sight picture.
 
Can this mark III be put on a cantilever mount. I seen some scopes in the pic thread with a cantilevered mount, what scopes are those by chance?
 
Flashlight Mod.....what was i waiting for? I got a BSA (dont laff):p high quality light and laser combo. model LLS. Check the reviews-its a very durable set up. It can go on a scope or separately to the AR rails. Wow! I got the light on and went outside in the dark. The light is amazing, and looking through the red dot or co-witnessing through it was astonishing.:eek: I could pinpoint a shot at any varmint with such ease. Best accessory to date. Note: I put the laser on my AK-47 because it is better quality then what I had on there. Really got some bang for the buck. I have no use for the scope mount hardware but it will go in the parts drawer, I'll use it for sumthin'
 
flash suppressor

HCKRUSE said:
I have just recenlty purchased a M&P15-22 and would like to add a flash suppressor to the barrel just for cosmetic purpose as it looks totaly bare and was wondering if there was any available that could be attached without having to thread the barrel.?
Thanks for any info;

Howard K.
Click to expand...

Hello Howard, just wanted to give you my 2 cents on flash suppressors. I to like you wanted to install one of these on my 15/22 but found the cost for just adding something cosmetic a little much. I looked around at a lot of different add on's that I could dress up the barrel of my 15/22 with and came across this slick little item that slips onto the barrel & attaches with a brass set screw. It is a ventilated barrel shroud from Moerse Lekker at Moerse Lekker Sales at Moerse Lekker Sales, LLC. It ran me $55 shipped. Hope this helps.
 

Attachments

  • SWMP_6.jpg
    SWMP_6.jpg
    69.4 KB · Views: 492
magpul make a nice rail virtical grip (RVG) that stays solid with a storage comp part#mag412-blk, and galco (slc-b) has a slc strap that works well for me,no need to buy rings, this one loops throw slot in stock and clips to sling loop at bottom,
 
got a badger tactical charging handel latch the other day but it does not work on the m&p 15-22 it is about 1/8 of an inch to short on the latch bar, would work nice if i can find somone to lengthan it a bit,anyone know where i can get some help with that
 
riderrick65 said:
Hello Howard, just wanted to give you my 2 cents on flash suppressors. I to like you wanted to install one of these on my 15/22 but found the cost for just adding something cosmetic a little much. I looked around at a lot of different add on's that I could dress up the barrel of my 15/22 with and came across this slick little item that slips onto the barrel & attaches with a brass set screw. It is a ventilated barrel shroud from Moerse Lekker at Moerse Lekker Sales at Moerse Lekker Sales, LLC. It ran me $55 shipped. Hope this helps.
Click to expand...

I am debating on flash suppressor or shroud for my fun gun. Your pic looks different than what is seen on the url link. Can I assume what you are showing is what is delivered or am I missing something? I dont like surprises...lol
 
scarsknight said:
got a badger tactical charging handel latch the other day but it does not work on the m&p 15-22 it is about 1/8 of an inch to short on the latch bar, would work nice if i can find somone to lengthan it a bit,anyone know where i can get some help with that
Click to expand...

Help? send it back and order one from Belt Fed! done deal.
 
Mil-Spec said:
I am debating on flash suppressor or shroud for my fun gun. Your pic looks different than what is seen on the url link. Can I assume what you are showing is what is delivered or am I missing something? I dont like surprises...lol
Click to expand...

What's the difference that you see?
 
cowboydave said:
065.jpg
Click to expand...

What scope do you have?
 
grogbro said:
I just bought the mp15 .22 about a week ago also. No problems with it at all. I've read through this thread and no ones really commented on this item:

ZAHAL -FAB Tactical Foregrip Bipod

Is that because its a foreign product, or is it no good really? I really like the looks of it and it solves pretty much my foregrip and bipod search problem.

Also searching for a scope for the gun, but I am not sure if that's even the right terminology. I see the normal, long, rifle scopes on OpticsPlanet, but also the red dot, reflex, and shorter scopes. Any guidance for a beginner buy would be great. Looking to spend around $200 for one.

Thanks!
Click to expand...

Great products (mil specs) so expect to pay a premium...

Got some accessories for my PPQ and very happy!
 
Has anyone used the Smith & Wesson Flashlights Miniature Weapon Mounted Light on the 15-22? It apparently is made for handguns, but would it be bright enough for indoor use?
 
90 Lumen "Out the Bezel" Blinding Light
Click to expand...
Bwahaahahahahahahah.

Blinding? Even the 600 lumens from my TNVC G2 conversion doesn't blind anything.

That being said it is rated at 90 lumens, which is more than the original 6P's 60, so it will work. I use a 110 lumen on my 15-22 because I don't need a real light on mine. 110 works for indoor and shade so the 90 shouldn't be too bad.

I'm not sure the mounting system will work on a picitiny rail though.
 
You must log in or register to reply here.

Similar threads

H
Why I chose the 15-22 over the 522
2 3
Replies
60
Views
15K
Gopher Slayer
Gopher Slayer
TangoFoxtrot
For Newbe to the AR Platform Who Are Considering Buying The S&W M&P Sport
2
Replies
31
Views
12K
RainDodger
RainDodger
davnic66
  • Poll Poll
S&W M&P 15-22 M4 / CAR Conversion
2 3
Replies
60
Views
39K
rickyblaze
R
C
My plans with some questions, need some advice.
Replies
28
Views
5K
Jorsche
J
D
S & W M&P 15-22: Talk me out of it!
2
Replies
42
Views
11K
mud king
M

Latest posts

Back
Top