M&P15 picture thread

[JH7471]

New to the Forums but have followed them for quite a while. Posting a pic of my completed build. It has been a work in progress for the last two years.

 

[Mustang5L5]

M&P15 picture thread

My Sport. Only original parts at this point are the lower receiver (and lower parts kit), rear flip up sight, and the 1/8 twist barrel.

Ignore the crappy red dot. Just temp

 

[FrostKing]

M&P Family

Two 9's and a Sport

 

[jcarroll19]

Sent from my iPhone using Tapatalk

 

[jcarroll19]

That is my m&p collection m&p 9c. M&p shield and m&p15 sport And the odd one out is a glock 19


Sent from my iPhone using Tapatalk

 

[-Havok-]

New to the forum (and AR's in general). Here's mine I just picked up yesterday. Came with a CAA CBS16 stock, Magpul Gen 2 Pmag, and an upgraded bolt/carrier (can't remember brand at the moment). Pretty clean for a used one and I bought it from a great shop, so I'm sure it's in spectacular condition. Got it about $200-$300 cheaper than the beat up overpriced ones they sell at pawn shops out here, so even though I couldn't really afford it, I felt I couldn't afford to pass up the deal either! Current upgrade plans include 15T quad rail(and smaller gas block), flip up sights (and optics, paycheck permitting. Lol), possibly a different stock and flash suppressor, and bullet button/10rd mags at some point if I move back to Cali.

 

[Le Guedin]

Voici le mien

MP15 X

 

[78Staff]

OK, so it's not a S&W - but, by picking up a BCM upper for my Ambi lower, I was able to put my S&W/Troy back together as well . BCM 14.5 ELW Mid KMR on Aero Ambi lower.




And the re-assembled M&P...

 

[gunny4053]

OK, so it's not a S&W - but, by picking up a BCM upper for my Ambi lower, I was able to put my S&W/Troy back together as well . BCM 14.5 ELW Mid KMR on Aero Ambi lower.

78Staff, that looks nice! Well done, my friend. How's it shoot?

 

[78Staff]

78Staff, that looks nice! Well done, my friend. How's it shoot?

I'll tell you this after the weekend, just got it put together . Had been eyeing the upper for a while, but the free BCG promo was ending soon so went ahead and picked it up.

I'm short one mag release spring somehow, there wasn't one in my small parts kit, that or I lost one... So need to order one along with diff buffer/spring I think, but should be ready for range duty this weekend.

 

[Hoss0432]

Just the start of my S&W collection.


Sent from my iPhone using Tapatalk

 

[Ruark]

Here's mine. Done a few mods, but love this gun!

 

[GrimSlate]

This is my rifle. There are many like it, but this one is mine.



In no particular order,

Battle Arms Development - Ambidextrous Safety Selector (B.A.D-A.S.S)
Rainier Arms Raptor
Primary Arms MD-ADS on Fortis F1
MFT Battlelink Minimalist
15" Troy Alpha Rail Enhanced
Lantac Dragon
Spike's ST-T2
YHM Low Profile Gas Block
Magpul MBUS Gen2 Front & Rear
Blackhawk Vertical Grip
Magpul Gen2 MS4
KNS Pins
Magpul MOE-K2

 

[78Staff]

This is my rifle. There are many like it, but this one is mine.



In no particular order,

Battle Arms Development - Ambidextrous Safety Selector (B.A.D-A.S.S)
Rainier Arms Raptor
Primary Arms MD-ADS on Fortis F1
MFT Battlelink Minimalist
15" Troy Alpha Rail Enhanced
Lantac Dragon
Spike's ST-T2
YHM Low Profile Gas Block
Magpul MBUS Gen2 Front & Rear
Blackhawk Vertical Grip
Magpul Gen2 MS4
KNS Pins
Magpul MOE-K2

Solid setup there...

 

[78Staff]

I'll tell you this after the weekend, just got it put together . Had been eyeing the upper for a while, but the free BCG promo was ending soon so went ahead and picked it up.

I'm short one mag release spring somehow, there wasn't one in my small parts kit, that or I lost one... So need to order one along with diff buffer/spring I think, but should be ready for range duty this weekend.

Larue Mount arrived today for the ACOG, mag release spring (for the M&P) should be here tomorrow. Of course, I've had the Flu all week so not sure if I will be able to get out to the range or not now .

EDiT - parts arrived from Brownells, so the M&P 15 is whole again now as well . Also bought another Raptor Charging Handle, just didn't care for the BCM ambi model...

Better pic of the BCM...

 

[wurger]

Here is my new 15 Sport. MI drop in rail, Emod, Tango Down grip and Aimpoint. Working on parts for an 18" upper.

 

[Shootingfun]

My M&P 15 Sport

Well here is my final finished AR 15 M&P 15 Sport.
I love shooting this rifle, here is a list of the add on's.
1. Jerry Miculek Muzzle brake
2. A*BArms hand guard
3. Millette scope mount
4. BCM gunfighter charging handle
4. Magpul B.A.D lever
5. Magpul MOE+ grip
6. Magpul CTR stock
7. DPMS extra large safety lever
8. UTG Bi-pod, bought because of the reviews by Nutafancy
9. 2x7 30mm scope not sure brand got it as a gift works fine
10. H1 buffer and new buffer spring
11. Magpul rear pop up sights
12. Talon grip tape on the hand guard
Well doesn't look like this anymore sold most of everything that is on this rifle in these pics

 

[cryer1013]

what size quad rail are you guys using on a moe mid length

 

[Kadonny]

Just thought I'd throw out an updated pic of my Sport with it's now bigger brother, a Colt AR15M4.

 

[Hoss0432]

Started my camo paint job. Base coat done now comes the fun part!

 

[Royb12]

My Sport

Here is my Sport. I added the following:

Anderson Upper assembly with foward assist and dust cover
Magpul MOE handguard
Magpul K2+ grip
Magpul CTR buttstock

I freaking love my Sport, it's an awesome rifle.

 

[cajunfirehawk]

My M&P 15T

​

 

[para82frame]

I have made a few minor changes in the last 2 years. haha

S&W M&P15 sport with Primary Arms 1-4x24 RDS, GuntecUSA rail, Magpul rail covers, BUIS, CTR stock and MOE grip, SF LED flashlight with remote switch and a Blackhawk 2 pt. sling.

(plus my plate carrier, US Palm molle defender, lvl 3 plates, IIIA backers/spalt liners, double rifle/pistol shingle, single pistol mag carrier with a CAT and EMT shears and a IFAK on the left strap)

 

[Techse7en77]

Here's my M&P15...
So far I've added:
- Magpul +grip
- Magpul AFG2 angled foregrip
- Veriforce aluminum quad rail
- Vortex Strikefire II

The only other thing I want to add is the MOE SL stock.

 

[R2BA]

Got the final upgrade for my Sport. K.I.S.S.

Upgrade List
Primary Arms 4x ACSS (Advanced Combat Sighting System) or Vortex Strikefire Red Dot (not pictured)
Magpul MOE Pistol Grip, Handguard/Heatshield, MVG
Magpul CTR buttstock
Elzetta Tactical A2 flashlight mount
Streamlight Polytac 220 lumen tactical light

This is exactly what mine will look like once my parts get here minus the ACSS. Looks great!

 

[R2BA]

Here is mine so far in all her glory

Parts I used

Streamlight 88860
Elzetta ZFH1500B AR15 Tactical Flashlight Holder
UTG DS3068 Scope
MOE MAG400 BLK MIL (Butt Stock)
Magpul M-LOK CAR Length Fore End MAG 424 GRAY
Magpul MOE® Grip MAG415
Magpul MVG® - MOE® VERTICAL GRIP MOE SLOT SYSTEM
PMAG® 30 AR/M4 GEN M2 MOE® WINDOW 5.56X45MM NATO

 

[ClayCow]

Here is mine so far in all her glory

What sight is that?

 

[R2BA]

What sight is that?

Just a cheap UTG DS3068 I had laying around. I have an EOTech 512 on the way.

 

[M&P15Tee]

The current version of my new toy ...

 

[PoliMetal]

Did you really pay almost the same price for the Holosight as you did for the rifle itself? Haha wow.

Your point?