Victory data base

[4carbcorvair]

Hello all.

Picked up my Victory quite a few years ago. Bought a few boxes of 38 S&W only to find out much later that it has been machined for 38 special. Haven't had an issue running either, the 38 S&W ammo is definitely a weaker round.

Any info on mine? Serial number: V 704310

5 inch barrel. Usual markings, don't see any British or other stampings. Stamped US Property GHD there is what looks like an '8' in front of the 'US'???. 'P' stamped in 4 locations. Also, marking in front and behind the S&W 38 CTG on the side of the barrel, not sure what those are. Unfortunately, it has the incorrect grips. Any guess on when it may have been shipped??

 

[Absalom]

Hello all.

Picked up my Victory quite a few years ago. Bought a few boxes of 38 S&W only to find out much later that it has been machined for 38 special. Haven't had an issue running either, the 38 S&W ammo is definitely a weaker round.

Any info on mine? Serial number: V 704310

5 inch barrel. Usual markings, don't see any British or other stampings. Stamped US Property GHD there is what looks like an '8' in front of the 'US'???. 'P' stamped in 4 locations. Also, marking in front and behind the S&W 38 CTG on the side of the barrel, not sure what those are. Unfortunately, it has the incorrect grips. Any guess on when it may have been shipped??

A nice example of a British Service Revolver from the second half of 1944, maybe September or thereabouts.

With no modifications other than the chamber conversion and the period-incorrect replacement stocks (the latter easily remedied), but no commercial post-war proofs or import marks, it's in better condition than most.
The "8" is likely the flaming bomb ordnance mark. The marks before and after the caliber stamping are a S&W thing and just decorative.

 

[4carbcorvair]

Thank you!

It's been interesting reading thru the 25 pages! Lots of interesting info.

 

[Wiregrassguy]

The decorative marks on the barrel are called dingbats.

 

[capecodcaper]

Hey guys,

Looking to get a little information on my revolver.

5"
.38 S&W
"United States Property" marked

Serial: 980672 no "V" mark

 

[Absalom]

5"
.38 S&W
"United States Property" marked

Serial: 980672 no "V" mark

That would be a British Service Revolver, also called a "pre-Victory" model since it was produced shortly before the serials hit 999999 and the V prefix started in spring of 1942. The property mark identifies it as a gun shipped to Britain under the lend-lease program. For any further comments on markings, condition, post-war modifications etc., you'd need to post some photos.

 

[capecodcaper]

That would be a British Service Revolver, also called a "pre-Victory" model since it was produced shortly before the serials hit 999999 and the V prefix started in spring of 1942. The property mark identifies it as a gun shipped to Britain under the lend-lease program. For any further comments on markings, condition, post-war modifications etc., you'd need to post some photos.

Thanks for the information! Here is an album. My victory

Tell me more if you can

Had a bunch of trouble finding a US victory holster for it (I do WWII reenacting), so I know why I guess haha

 

[Absalom]

Had a bunch of trouble finding a US victory holster for it (I do WWII reenacting), so I know why I guess haha

The US Victory model had a standard 4" barrel, while 5" was standard on the British Service Model, so that might be a problem with holster fit.

The photos are a bit dark and and not very well-lit, but it appears all original, at least externally unmolested and in pretty decent shape, and I don't see any of the post-war Btitish commercial proofs that decorate many of these either, and that's a plus for collectibility. Have you checked whether the chambers have been converted to fire .38 Special? If a live .38 Special round goes all the way in, they have, a common occurence, which was frequently done without marking the gun otherwise.

 

[thadheth]

A Pre Victory British Service Revolver for the Data Base

I believe you want Pre Victory revolver information for the data base (forgive me if that is not the case)....
S.N. 907306
.38 S&W not converted to .38 Special.
W.B., Flaming Bomb, and P Proof on Butt.
Stampings on Butt, Cylinder, and Barrel all match; cannot read grip stamp.
Underside of barrel importer stamped NA CO RIDGEFIELD NJ.
Made in USA and S&W logo on right side.
I find no other proof markings and no apparent polishing to remove them.
Finish is worn - originally bright blue?
(Sorry, pictures are not great and I do not have the gun in my possession at the moment.)

 

[Absalom]

S.N. 907306
.38 S&W not converted to .38 Special.
W.B., Flaming Bomb, and P Proof on Butt.
Stampings on Butt, Cylinder, and Barrel all match; cannot read grip stamp.
Underside of barrel importer stamped NA CO RIDGEFIELD NJ.
Made in USA and S&W logo on right side.
I find no other proof markings and no apparent polishing to remove them.
Finish is worn - originally bright blue?
)

That sounds like you found a relatively well-preserved and unmolested one of the type. Likely from about March/April 1942 or so. The finish at that time would no longer have been bright blue for a pre-Victory. They switched to "Black Magic" sometime in 1941, a more matte black/grey finish.
Everything sounds in order, and the importer appears to have found a relatively unobtrusive spot for his mark, rather than slapping it on the side of the frame like many did. The import mark itself indicates that the gun re-entered the country after 1968 (the GCA), and was not part of the big surplus wave that went mostly through Birmingham in the 1950s and left so many of these ex-BSR's with very prominent post-war commercial proofs.

 

[thadheth]

Thank you for the information on the date of manufacture, importation, and finish, Absalom.

 

[DWalt]

The importer (NA) is Navy Arms. The closest SN I show is 9084xx which shipped in 2/42.

 

[thadheth]

Thanks for your usual precision on shipping dates, DWalt. I still marvel at how nicely these old revolvers were manufactured. Now I need to load up some .38 S&W and shoot this one.

 

[ordnanceguy]

I believe you want Pre Victory revolver information for the data base (forgive me if that is not the case)....
S.N. 907306

Thank you for posting this information. I will make sure to have it incorporated into the Victory Model Database which my pal LWCmdr45 and I maintain.

There is a good chance that your revolver served with New Zealand forces. It falls in the correct range and Navy Arms is known to have been the primary importer of the NZ guns back to the USA many years ago. When you get the revolver in hand you might want to check for any markings just above the back strap. If it is a NZ gun then NZ property markings are likely located there.

From the Database I would estimate for you that it shipped from the factory in the January-March, 1942 time frame.

 

[merl67]

My lend lease serial 917188 is stamped with the same importer and is a New Zealand marked one it is in the data base already I think.

 

[thadheth]

Mr. Flick - Thank you for the information about shipping date and possible New Zealand service for Pre-Victory 907306.
On another note, not sure if information about the following Victory was submitted for the data base or not:
S.N. 467279
4" Barrel
Marked "Bavaria Municipal Police" (as shown in SCSW)
.38 Special
Markings appear crisp, gun is blued. Original?

 

[DWalt]

A blued finish is not original, if that is what you are asking. V467279 would date it from late 1943.

 

[Absalom]

The photos of your Bavaria Victory are very hard to interpret. On each, the lighting is different. Photo 4 looks definitely reblued, on some of the others it looks almost original. But as DWalt says, no original blue on a 1943 Victory.

 

[thadheth]

Thank you DWalt and Absalom. It's apparently an old refinish.

 

[mr-mom]

There is pre Victory for sale on the forum. SN 998718. What can anyone tell me about this one?
Dave
SWCW #2778