What’s so great about 10 mm?

[Plinkasaurusrex]

I have an opportunity to purchase a model 610, 6 inch. I have never fired a 10 mm round. I own 2, 41 magnum Revolvers.
I can’t really imagine the 10 mm being that much better. Is it?

 

[ken158]

Nope - If you have a 41 mag then you are good. The 610 is just a way to shoot auto rounds in a revolver. The 10mm shines in an auto.

 

[Dan Zulu]

Ammo is the same price as 9x19 in many parts of the country right now.

 

[arjay]

I’m assuming it can take moon clips? That’s a fast reload and enough of an excuse to buy it ;-)
I’d like one with hot loads in a 1911 pattern gun for bars and such [emoji16]

 

[M29since14]

NOTHING. It's just something to sell. If you already have a solid .45 automatic and some sort of magnum revolver that begins with .4x there is no need for one. If you are one of those exceptional people who can actually use a real, honest handgun (one you can actually wear on your belt) at 100 yards and beyond, then the 10 might have something for you that the .45 doesn't, but certainly nothing that your .41 or .44 Magnum revolver can't easily keep up with - and exceed. JMHO.

 

[raygixxer89]

I’m assuming it can take moon clips? That’s a fast reload and enough of an excuse to buy it ;-)
I’d like one with hot loads in a 1911 pattern gun for bars and such [emoji16]

What kind of bars do you frequent??!! Lol
OP, I think a 10mm shines in an auto. If you have a 41mag or even a 357, I wouldn't get it unless it was to collect.

 

[rockquarry]

I've never seen the attraction or need for one, but that doesn't mean it's worthless or a duplication to some shooters.

 

[CH4]

I like the 10mm because it’s 1mm bigger than a 9mm; it’s what all other semi auto rounds want to be when they grow up.

Coincidentally, last night I loaded my very first batch of 10mm ammo. Been reloading for decades, but only rifle and rimmed revolver cartridges, but never auto cartridges; .38s will be my next.

 

[jc2721]

A couple of months ago I found 14 boxes of 10 mm fmj for $23 a box so naturally I bought all of it. A friend gave me his dies, some primers, .40 casings and about 3000 hard cast bullets, so now I'm looking for a 10mm Smith and some moon clips, lol.

I have a 4" 57, but it's too nice to shoot and ammo is $25/20 rounds--ouch!

 

[Univibe]

With a .41, you fire six rounds, and it's empty.

With a 10mm, you still have 10 left.

 

[lrrifleman]

In my opinion, the 10mm is a good choice for those that haven't discovered the utility of a 41 Magnum.

That said, I will soon be owning an example of each of the traditional Magnums, but I would consider the purchase of a 4" Model 610, because of the ability to fire 2 cartridges, it adds a little versatility when looking at inventory.

My 9mm 1911 will become a switch barrel in order to fire 38 Super. My 40 P229 has a 357 Sig barrel. You understand the interchangeability of the 38/44 Special with the 357/44 Magnum.

In some respects, an answer to your question would be comparable to why a 1917 or a 25/625 when you can have a 1911! Realistically, have you ever watched a skilled revolver shooter, and accuracy-wise how they can outshoot a person armed with a semiautomatic?

 

[Muss Muggins]

With a .41, you fire six rounds, and it's empty.

With a 10mm, you still have 10 left.

He’s buying a 10 mm revolver, so there’s that . . .

 

[AlHunt]

For a revolver cartridge, is 10mm more available than 41mag? For non-reloaders, that might be a deciding factor.

Otherwise, having a 10mm revolver is great justification for buying a 10mm semi-auto. I don't know of any 41mag semi-autos offhand.

 

[3rdgeargrndrr]

For a revolver cartridge, is 10mm more available than 41mag? For non-reloaders, that might be a deciding factor.

Otherwise, having a 10mm revolver is great justification for buying a 10mm semi-auto. I don't know of any 41mag semi-autos offhand.

Right before I was able to say it, he said it.

Also The 41 seems to be an inherently accurate cartridge. Probably slightly moreso than the 10 or 40.

 

[Dave Lively]

In revolvers, it's just another caliber.

In the late 80's I got caught up in the 10mm hype and bought a 1911 style 10mm. Like many 10mm handguns of the time it was just a .45 with a different barrel and recoil spring that was not designed to handle the 10mm. After it broke I sent it back to the factory and after it came back traded it for a 610 no dash since I still had a lot of 10mm ammo and components.

The 610 was a great shooter but after buying a S&W 69 I realized in a revolver there was nothing 10mm could do that a 44 couldn't do better and sold the 610.

If you already own a 10mm semi-auto, want a revolver but don't want to support an additional caliber the 610 is a great choice. But otherwise I would just stick with your 41s unless you just want to buy a new gun in a new caliber. There's nothing wrong with wanting a new gun, you certainly don't have to justify it to anyone here. Wives sometimes think a mere two handguns is enough but we all know better.

 

[tlawler]

A couple of months ago I found 14 boxes of 10 mm fmj for $23 a box so naturally I bought all of it. A friend gave me his dies, some primers, .40 casings and about 3000 hard cast bullets, so now I'm looking for a 10mm Smith and some moon clips, lol.

I have a 4" 57, but it's too nice to shoot and ammo is $25/20 rounds--ouch!

Where are you finding .41 Mag ammo for $1.25/round? That’s what 9mm is going for around here.

OP...do you have any more info on the 610? Dash number, serial# range, does it come with box, tools, manual, etc.? If it’s an early first run or even any pre-lock and you can get it at a decent price, I’d say go for it. The collectibility factor is definitely there. Disclaimer: I am a little biased, as I’m a big 610 fan.

 

[Invictus357]

It sounds cool.

That's all the reason you need.

If the 44 magnum had been called the "44 tinkerbell" it would not have gained quite so much popularity.

 

[Hair Trigger]

I love 10mm, but I don't care for rimless cartridges in a revolver. I think of 10mm being the .357 magnum of autoloaders. I have a 1911 in 10mm, AFAIC it's a perfect combination. It's not as hot a load as .41 Magnum, even though the bullet weights can overlap. I prefer 10mm with a slightly lighter bullet, I shoot 155 and 180 grain loads. A 155 from a 10mm is similar to a 158 from a .357 in both mass and velocity at full power loads, although the .357 is a bit higher SD, which should give superior penetration.

 

[Loyaljeeper]

I was a 10mm fan before it was cool. The attraction is a cheap to shoot revolver capable of killing anything in the 48 states. I won’t get into the autos, but with a revolver the 10mm shines as it is the most recoil I want in a < 42 oz revolver such as a 4” 610. The real 10mm loads are 180 grains at 1250 plus. That load beats 357 mag no matter how you look at it with 12% more weight and 12% more sectional density.

Many of us have a very cheap or free source for 40 ammo which shoots great in a 610. That makes for very affordable light practice ammo and reasonably priced 10mm loads for defense. That isn’t something 44mag shooters really get to say unless they cast and hand load because 44spl is more than 44 mag.

 

[tlawler]

I love 10mm, but I don't care for rimless cartridges in a revolver. I think of 10mm being the .357 magnum of autoloaders. I have a 1911 in 10mm, AFAIC it's a perfect combination. It's not as hot a load as .41 Magnum, even though the bullet weights can overlap. I prefer 10mm with a slightly lighter bullet, I shoot 155 and 180 grain loads. A 155 from a 10mm is similar to a 158 from a .357 in both mass and velocity at full power loads, although the .357 is a bit higher SD, which should give superior penetration.

Naw, THIS is the .357 Magnum of autoloaders!