Which Remora holster for M&P Shield?

[Dino1]

3B RFT

Originally purchased for a Kahr MK40, pistol fits in it like it was made for it.

 

[nickel plate]

Finally got the computer fixed-here's what Mike at Remora recommended and sent me. BTW, no sweat shield, don't know if the sweat shield would give me an equal drawing grasp as this one does. I've been wearing CCW it around town for a few weeks and I do like it.
Seems that a lot of various Remora holster styles fit the Shield. There's still a couple of days left to get in on their 20% off sale...

 

[Dino1]

Finally got the computer fixed-here's what Mike at Remora recommended and sent me. BTW, no sweat shield, don't know if the sweat shield would give me an equal drawing grasp as this one does. I've been wearing CCW it around town for a few weeks and I do like it.
Seems that a lot of various Remora holster styles fit the Shield. There's still a couple of days left to get in on their 20% off sale...

I like the fit of the 3B with the sweat shield over the 6ART, at least it covers the whole side of the slide so it does not make contact with the body. This will keep sweat off the pistol, and it won't dig into your side.

 

[checkmyswag]

6ART RFT...hmm....might have to order one of those too. I'm OK with how the 6 ART fits but do like the looks of the RFT better. Never had a holster without a sweat shield though, so would have to try it.

 

[2tango2]

3B RFT

Originally purchased for a Kahr MK40, pistol fits in it like it was made for it.

I like how that one fits...sort of soured on them due to not replying to my email but whatever. That one does look good though

 

[nickel plate]

Nickel plate...look at the package in the photo. It shows 6 Art SS. The back side if it would just be the back of the holster. It covers the gun.

As far as which one would offer a better grip, it would be the SS model for sure.

I don't understand your answer. Simply put, does the back side sweat shield come anywhere near or in contact with the magazine release? A photo would help. Thanks.

 

[zotzer]

I just went ahead and ordered the 3B with the sweatshield, leather-lined, but without the RFT. I am a tad concerned about how well it covers the trigger, but we'll see how it looks. Also looks like less overall bulk than the 6ART which I find too big.

Thanks, Dino, for providing those pics....very helpful.
Tracy

 

[checkmyswag]

Nicole Plate. I checked it out. If it covers the mag release at all it covers maybe 10% at the top. I couldn't release the mag by pressing on the holster over the mag release. I don't think it would be an issue.

 

[xcutter]

I agree. The confusion over which size/shape is best was turning me away. I look forward to knowing what and how to order for a Shield!

I agree about the confusion. I ordered the Remora 6ART-RFT yesterday. I mentioned all the confusion on this forum in the comments section of the order form. I told them to send me the holster that is correct for the Shield 40.

 

[Mumbleypeg1]

Although this thread seems (with a few notable dissenters) to be among fans of Remora holsters, since you are looking for a Remora that fits the Shield, may I suggest you take a look at Sticky Holsters? See Sticky Holsters | Redefining Concealment. Although I have never owned a Remora the Sticky Holster seems to be very similar to the Remora. I frankly have been a skeptic regarding fabric holsters, but recently bought a Sticky model MD-2 for my Shield. It fits the gun perfectly and so far I am finding its function and comfort very positive. (Full disclosure: have not had either the Shield or the holster long enough to wring either out thoroughly enough to make this an EDC rig.)

 

[Bugkiller99]

This forum is great! I've picked up more information than I could have every imagined. I have a Remora 6ART SS. I, too have had problems with the rear sight on my Shield hanging up on the seam of my Remora holster. As I am new to CCW I just chalked it up to "user error".

After reading this thread, I decided it was a problem with my holster. I emailed Remora earlier today. And lo and behold, I got a response just a few hours later. Mind you today is Easter Sunday. I was told I will be getting another holster shortly. So my customer service experience (so far) has been great. Once I get the replacement in I'll post an update.

Oh, I wanted to add I got my son a Remora for his Ruger LCP. He loves it. Hopefully I'll say the same for the replacement.

 

[S&WForty]

may I suggest you take a look at Sticky Holsters? See Sticky Holsters | Redefining Concealment. Although I have never owned a Remora the Sticky Holster seems to be very similar to the Remora. I frankly have been a skeptic regarding fabric holsters, but recently bought a Sticky model MD-2 for my Shield. It fits the gun perfectly and so far I am finding its function and comfort very positive.

I ordered my MD-2 last night.

 

[Mumbleypeg1]

I ordered my MD-2 last night.

Hope it works great for you. Got mine from LGS who recommended it and said he would give me a full refund if I don't like it. For $23 bucks I couldn't turn down the opportunity to give it a try. I don't plan on taking it back.

 

[nickel plate]

I too am very happy with my Remora 6ART-RFT for my 9mm Shield-so much that I bought my S.O. a Remora 8 RFT for her S&W model 60LS Lady Smith. She too is very pleased with the revolver carry and placement.

 

[e-jism]

Afraid I didn't have much luck with Remora. As I posted in another thread, they sent me two holsters and neither were the right fit. When they offered to send a third, I opted for a refund. I agree with SW 40, if they can make a holster to fit the Shield on specific requests, why not just make it part of the product line and eliminate all of the confusion? Remora folks are nice enough, just felt like I was gettin' the run around.

They are letting me return both holsters and said they will pay for the shipping.

 

[2tango2]

They never answered my email asking about the custom that was listed here so I moved on and bought a Sticky at a LGS

Works great and fits my xDs as well


Sent from my iPad using Tapatalk HD

 

[S&WForty]

They never answered my email asking about the custom that was listed here so I moved on and bought a Sticky at a LGS

Works great and fits my xDs as well


Sent from my iPad using Tapatalk HD

Which did you get? MD-2 or MD-4? I ended up with the MD-4. It holds a G27 very snugly, held my SW990Lc a little better, so I know it'll hold my Shield well when I get it.

Sent from my Galaxy Nexus using Tapatalk 2

 

[2tango2]

Which did you get? MD-2 or MD-4? I ended up with the MD-4. It holds a G27 very snugly, held my SW990Lc a little better, so I know it'll hold my Shield well when I get it.

Sent from my Galaxy Nexus using Tapatalk 2

That is the MD-2. Fits the Shield and the xDs perfectly


Sent from my iPad using Tapatalk HD

 

[zotzer]

Just got the 3B SS. Way too small. Doesn't even come close to covering the trigger....totally exposedo on the non-sweat shield side.

I could try the heating method to stretch, but wow...it would require A LOT of stretching. The pic someone posted here made it look like the trigger is covered. Not even close on the one I just got.

Tracy

 

[kilyung]

I spoke to Remora today and they stated that the fitment guide needs to be updated. They recommend 5ART for the Shield. I'm going to get the 5ART with partial sweat shield and no RFT.