Mp 2.0 4 inch -Problem-

[Sigma4506]

Hi all, Question just bought MP20 9mm Bought it about 2 weeks ago and noticed when i pull the trigger 1/2 -3/4 back you can feel its hitting something -took the slide off and trigger pull is fine- put it back and hitting again -Ok -As i look the right side slide stop is moving when i pull the trigger & than i hold my finger on the slide stop and feel it pushing it out -Left side slide stop Nothing no movement at all .i did get a return label just wondering what the Heck it could be anyone else have an issue like that ?

 

[HOUSTON RICK]

No, I have a M&P9 that I bought used about 20 years ago. It makes almost every range trip. Has been carried in a holster and has never missed a beat. Was your weapon purchased new?

 

[lacerda023]

Trigger bar rubs against the slide stop. There is a pad on the slide stop to give you a pronounced reset. The more you shoot it the less you feel it.

Or Apex Forward set trigger kit makes it a totally different handgun on the ++ side. Most gen 1 don't have much if any tactile reset click. That pad on the 2.0 is what gives you the click on reset. Shooting it usually wears it in.

 

[Saudade]

The trigger bar also pushes up on the firing pin block. Something that doesn't happen with the slide off. It's totally normal.

 

[Rastoff]

Sounds like it's working perfectly. The trigger bar does push on the right side slide stop to increase the feel of the reset.

 

[LVSteve]

Sounds like the reset Mafia have a lot to answer for.

 

[swsig]

So, how does it shoot?

 

[Sigma4506]

Thank you Gentlemen for all the answers , Bought it brand new a weeks ago so i'll just take it to the range a put a few hundred rounds and see if it wears in , Firearm collection - Sig p229&320 full&compact ,Glock 19 gen5,Glock23 gen 4 -Glocks have Apex triggers and DPM Recoil springs ,Alpha barrel conversion 40 -9mm ,S&W shield 40 ,S&W 4506,S&W 686-7 Shot - S&W AR-15 556-223 - 2nd Amendment in my pocket at all times