Semiautomatic pistols with 2nd strike abilty?

[Naphtali]

Among 9x19 mm semiautomatic pistols, which are the thinnest and smallest - that is, those most easily concealed in an IWB holster - that have the mechanism to second strike a chambered cartridge that does not fire upon firing pin's first impact?

While I anticipate I refer to pistols having exposed hammers, I know so little about semiautos that I asked for information about results I seek rather than about types of semiautomatic pistols.

 

[RGVshooter]

I honestly can't think of any small sub compact or even a compact 9mm that has second strike capability. However I can name a handful of very good 380's that do....

Bersa Thunder 380.

Beretta 84fs cheeta

S&W M&P Bodyguard 380.

I'm sure there's others as these are the only ones that come to mind right now...

 

[Arik]

Can't think of anything in the "pocket gun" category.

All traditional DA guns have a second strike capability and a few striker fired guns

Sent from my XT1650 using Tapatalk

 

[ColbyBruce]

The Sig P250sc is a DAO, double stack, hammer fired, polymer fame pistol with repeat pull. Here are my two, a 9mm and a .40 S&W.

The discontinued S&W 3914 was also offered with a repeat pull.

 

[bigggbbruce]

SCCY..CPX2

 

[ContinentalOp]

Sig P290RS.

If you want to go a little bigger the Sig P239 might do.

 

[Arik]

I guess you should define "thinnest and smallest". The guns some people are listening I wouldn't consider in that category. They are just shorter versions of the full size ones

Sent from my XT1650 using Tapatalk

 

[PPS1980]

Walthers P99 and the P99 Compact are 9mm, striker fired, and each have true DA/SA and second strike capability.

 

[Steve912]

SCCY..CPX2

A prettier version of the Kel-Tec P11, circa 1995.
Not particularly thin, but you get that with a
double-stack magazine.

There's at least one Taurus striker-fired pocket 9mm
that has striker re-cocking via trigger pull. Not sure why
that hasn't been taken up in other striker designs.

 

[Ozark Marine]

Sig P 290RS.

 

[dr. mordo]

A prettier version of the Kel-Tec P11, circa 1995.
Not particularly thin, but you get that with a
double-stack magazine.

There's at least one Taurus striker-fired pocket 9mm
that has striker re-cocking via trigger pull. Not sure why
that hasn't been taken up in other striker designs.

The Keltec P11 is 1" wide, which is 0.02" thinner than the single stack Glock 43. 12 bullets vs 6 and it's thinner... if only they were made a bit better. I had one and deeply regret selling it. That said, I had to do the "fluff and buff" and replace mag springs for it to be reliable, so they aren't for everyone.

Taurus PT111 G2. I've owned it and the P11, and while the P11 is a bit smaller, mine was a bit problematic. Meanwhile that Taurus PT111 was perfect with many different brands of ammo until I traded it to a pal who really wanted it. I plan to buy another PT111 G2. For $200, they are epic.

BTW, the reason the restrike capability hasn't been more common is the PT111 is a true single action pistol, unlike most strikers, which are a modified double action. The PT111 is single action, but if the slide doesn't move when the trigger is pulled (i.e. the gun misfires), the striker drops to a decocked position and trigger changes to a double action pull. It's pretty brilliant actually.

Cue the Taurus bashers... (paging Arik)

 

[Mdclinks]

The Springfield XDE & Sig Sauer P938 would fit your criteria.

 

[jjcobra]

I have a 2nd gen 469 that has 2nd strike capability.

 

[Naphtali]

I guess you should define "thinnest and smallest". The guns some people are listening I wouldn't consider in that category. They are just shorter versions of the full size ones

I don't know enough about sizing a semiautomatic pistol to furnish "numbers." My assumption is that those who own, use, and EDC-CW do know. For me "numbers" have less meaning than some sort of consensus among EDC-CW users, even if users prefer more cartridges at the cost of larger pistols. While they may sacrifice size for more capacity, they almost certainly know those smaller pistols that they chose not to use.

I further assume that any of those small, concealable 9x19 mm pistols will have a cartridge capacity of at least five - that is, the same or greater capacity than my revolvers. So I have no preference for double stack magazines over single stack.

 

[k22fan]

S&W's 3rd generation traditional double action (TDA) pistols have second strike capability. The TDA compact single stack 9 MMs are the Models 3913 and 3914.

 

[shocker]

Why is double strike an important consideration? In my mind it's one of the last things I would consider in a long list of criterion, simply because centerfire primers are extremely reliable, in my experience.

I've shot many thousands of factory and handloaded centerfire cartridges and I think I can remember ONE time the primer didn't fire and that was in a rifle. That was a handload and mostly likely I didn't seat the primer correctly.

 

[rd97]

The Remington R380 is a true double action with second strike capability. It is also a nice pocket gun.

 

[BAM-BAM]

Smith's chopped "Chief's Specials" ....... all the 39xx guns

 

[bigwheelzip]

Compact frame with double-strike from CZ:
CZ75 Compact
CZ75 D PCR (my EDC)
CZ P-01
CZ P-01 (omega) Convertible
CZ P-01 (omega) Convertible, suppressor-ready
CZ Compact SDP

Sub-Compact frame with double-strike from CZ:
CZ 2075 RAMI
CZ 2075 RAMI BD

 

[Muss Muggins]

KelTec . . .