You Guys Were Right!! I Can't Own Just One 3rd Gen...

[rags]

Right Mike?? To compliment my 6906 I picked up from "SpeedGunner" on the forum this year, I just bought this "New Old Stock" 4013TSW this past week. Christmas came early!

It was made in 1997. Serial #MSE2001, which was the first run of these. The first 2 years of this TSW were rail-less. Just what I (needed) wanted. Came with box and doc's. Is a third one down the road? I hope you enjoy the pictures!!

 

[Punisher102]

I love the 4013TSW and have owned two. Just down to one now but shes a great carry. Shes also ate everything Ive put in here with no heartburn.

If your a southpaw, you do know you can change the mag release to the other side right? Ive written a how too here if needed.

 

[427mach1]

Here's my favorite carry gun - made a little before yours, 11/12/96. Hope you enjoy yours as much as I have mine!

 

[Punisher102]

Where does mine sit with the serial number TDN90XX?

 

[Chuck Jones]

It's really not considered a problem until you have multiples of the same model.

/c

 

[mlk18]

It's really not considered a problem until you have multiples of the same model.

Or until you can re-create the S&W 3rd gen model wheel with actual guns!

 

[Ranger98]

Multiples of the same model Oh,you mean like these..

 

[rags]

One more of the same model and they'll look for a rubber room for you! "Similar" don't count!! Nice lookin' pistols!

rags

 

[ditrina]

Nice snag buddy....But I looked at all your pictures .. And it must be a counterfit!!!!..
I don't see the number 27 marked anywhere on the gun

 

[rags]

Nice snag buddy....But I looked at all your pictures .. And it must be a counterfit!!!!..
I don't see the number 27 marked anywhere on the gun

Just mixing it up a bit! The revolvers are beginning to wonder in the safe! They may start shooting straighter next time out! I DO have one that has a "27" on it!!

Sal, in case you missed it...here is the 6906.

rags

 

[Punisher102]

It's really not considered a problem until you have multiples of the same model.

/c

Then I have a problem,,,,,

OK, so I did have two at the same time,,,

 

[deanodog]

Rags that is a nice one. I predict you will buy more. I didn't own one a while back and now I have six 3rd gen. autos.

 

[ColColt]

Just curious-The Glock G23 was terrible to shoot-only pistol that ever hurt my trigger finger and the "snappyness" was pretty bad. I sold it but often wondered how a S&W in that caliber would be better?

 

[rags]

Just curious-The Glock G23 was terrible to shoot-only pistol that ever hurt my trigger finger and the "snappyness" was pretty bad. I sold it but often wondered how a S&W in that caliber would be better?

Haven't shot mine yet but it does have an inner and an outer recoil spring which may help. We'll see...

rags

 

[shooboy]

Hey rags, Nice piece, great pics as per usual from you. Love the prop rods, the caliber on the prop rod even matches the caliber of the gun ! Very cool !!! Shoo

 

[ladder13]

Nice fortay, I like them without the rail. Next up a 45.

Smith auto's are beautiful.

 

[Catshooter]

ladder,

If a 45 is next for you, you might shoot for one of these:

I warn you though, if you break into the Performance Center guns, you'll be sorry! That one will put a full mag into a group that will hide completely behind a US quarter at 20 yards.


Cat

 

[ladder13]

ladder,

If a 45 is next for you, you might shoot for one of these:

I warn you though, if you break into the Performance Center guns, you'll be sorry! That one will put a full mag into a group that will hide completely behind a US quarter at 20 yards.


Cat

Sure where can I find one?

 

[Mortech]

Do not BUY the S&W Wheel of wonder , you will find yourself trying to buy every model on it . I did until the wife put a stop to my (in)sanity .

P.S. these pics hurt for some reason I do not have a 3rd gen 45 in my collection .

 

[rags]

Do not BUY the S&W Wheel of wonder , you will find yourself trying to buy every model on it . I did until the wife put a stop to my (in)sanity .

P.S. these pics hurt for some reason I do not have a 3rd gen 45 in my collection .

Anyone have one of those Wheels? Wouldn't mind having one. I have looked at one before but not sure where...And it was long ago!

rags