M&P 15-22 Picture Thread

[JaPes]

I cropped and adjusted a picture to illustrate the MAGPUL MOE stock.

MAGPUL MOE Milspec Stock with a 1/2" cheek riser and enhanced rubber butt-pad.

Again, notice that when the stock is fully collapsed the cheek riser blocks the operation of the bolt charging handle. I usually keep my stock 2 to 3 clicks out from the collapsed position. Thank god for the shorter charging handle stroke on the 15-22 than a major caliber AR.

dont forget that it gives you additional sling mounting points and in my opinion a cleaner appearance as well

Yup. Forgot about that.

 

[Dragon88]

The MOE stock is a great upgrade over the standard stock. The CTR is even better, allowing you to lock it and have a very solid feel.

The ACS stock, however, is more of a special purpose stock to me. It adds a bit of weight to the rear and gives a different cheek weld. I really like it on one of my ARs, but it's not for every gun. The clean lines on the MOE/CTR are hard to beat.

 

[Rustpot]

The rear contour of the MOE/CTR are more comfortable to me as well. The standard carbine stocks that are flat at the rear, even the popular SOPMOD/Crane from LMT, are just not shaped to go against your shoulder. Even if they have an angled rear they're not as nice.

 

[Shaggs]

My gun is finished painting, now i would like to get an opinion, Should i keep this size for the barrel or shorten it like 2 inches?

I hope to get fast reactions!

Great looking gun, what did you use for paint? That would match my XD 45ACP so perfect... I'm a sucker for OD/black combo. She's all the way to the left

 

[antifederalist22]

My M&P15-22 (non-threaded barrel model).

- Magpul MOE Stock
- Magpul MOE Grip
- Magpul AFG Gen 1
- Magpul Enhanced Rubber Buttpad
- Magpul MBUS Gen 2 (Front/Rear) Sights
- Troy Rail Covers and Ladder Rail Covers
- Timney 3lb. AR-15 Single-stage Trigger
- Vortex Sparc Optic
- T22 Long Barrel Shroud
- Daniel Defense Rail Mount QD Socket

 

[Fapp3R]

here's mine..

 

[raven818]

My M&P15-22 (non-threaded barrel model).

- Magpul MOE Stock
- Magpul MOE Grip
- Magpul AFG Gen 1
- Magpul Enhanced Rubber Buttpad
- Magpul MBUS Gen 2 (Front/Rear) Sights
- Troy Rail Covers and Ladder Rail Covers
- Timney 3lb. AR-15 Single-stage Trigger
- Vortex Sparc Optic
- T22 Long Barrel Shroud

Looks great, in particular, I like the looks of the rail covers as well as any I've seen.
Googled all of you add-on's. Buck sure add up quick.

 

[shawnr5]

Here's my 1st generation now that I've added the A2 front sight.

 

[antifederalist22]

Here's my 1st generation now that I've added the A2 front sight.

I am more of a rail kind of guy, but the MOE handguards are great in function and appearance. In order for me to go with them though I would need them to be the Mid-length or Rifle-length. I have a decent reach and I like to have my reaction side hand positioned far down the barrel.

 

[shawnr5]

I am more of a rail kind of guy, but the MOE handguards are great in function and appearance. In order for me to go with them though I would need them to be the Mid-length or Rifle-length. I have a decent reach and I like to have my reaction side hand positioned far down the barrel.

I had a mid-length on mine when I had the quad rail gas block. I am running a carbine length on my AR and switched my 15-22 to a carbine because I wanted them to match. PM me and we can probably work out a deal on a mid-length MOE handguard, if that's the way you want to go.

 

[ChaneRZ]

 

[Sooner23]

Thought i'd show them all

 

[.50AE]

Here's mine with a cheap leapers 3-9x scope, different handguard,A2 sight, and flash hider

 

[shawnr5]

Here's mine with a cheap leapers 3-9x scope, different handguard,A2 sight, and flash hider

.50ae, it looks good. You are grossly understating things. You have a lot of parts and effort into that handguard and front sight swap. Keep up the good work and enjoy the fruits of your labor.

 

[300kb]

Hi guys heres my m&p 15-22 with a few accessories and my buddys AR I built for him.

 

[AdamB22LR]

Nothing says hi like a pic as a first post. Picked this up yesterday. Can't wait to take it to the range.

 

[riderrick65]

Well here it is, finally a few pics. of my rig that I have had since June. The only things left to do is possibly add a sling & JP enterprises 3.5 lb. springs (being shipped as we speak). Right now, just having to much fun knocking the bulls-eye center out of targets @ 25yds. Here is a list of the few things that I have done. Enjoy

* Leapers UTG 3-12x 44mm SWAT IE AO Mil-Dot scope
* UTG QD 30mm 4-Screw Hi-Profile Scope Rings
* Moerse Lekker ventilated shroud (slip on)
* Magulpul XTM rail covers (mix-n-match) 2 pkgs. Blk., 1 pkg.
DKE., 1pkg. FOLGR. & 1 pkg. ODGRN.
* Mako Foregrip/bipod combo
* CAA UPG-16 pistol grip
* "Tacticolor highlights"

 

[raven818]

Moerse Lekker ventilated shroud (slip on)

Like the looks of it a lot. Haven't seen it before.

 

[PHXSHOOTER]

Great job on your unique look. The grip got my attention. I am looking for that mod. I looked it up on Midway, great reviews there. I am a lefty so I have to be careful; it is the same configuration on both sides? How do you like it?

 

[Shaggs]

Nothing says hi like a pic as a first post. Picked this up yesterday. Can't wait to take it to the range.

Where did you find a green one?