M&P 15-22 Picture Thread

[shawnr5]

New Member with 15-22.
Ace Entry Stock
Weaver V3 1-3x Scope
Duracoat: Tactical Light Grey

Looks great. Does the Ace stock work with the standard receiver extension or did you have to modify it? I thought about shooting mine a gunship gray, but am sticking with black. Maybe I'll paint my AR, if I build a second one too.

 

[Sensei22]

Looks great. Does the Ace stock work with the standard receiver extension or did you have to modify it? I thought about shooting mine a gunship gray, but am sticking with black. Maybe I'll paint my AR, if I build a second one too.

Thanks Shawn. The Ace works with any 5.56 AR, but the diameter of the 15-22 buffer tube/receiver extension is to thick for the Ace stock. I believe grinding the 15-22's "buffer tube" down to a smaller diameter would have made the plastic to weak/thin/flexible so rejected that option. Putting on the Ace stock took some careful modification with a hack saw, dremel tool, and JB weld epoxy.

Step 1 of my project was to cut the 15-22's "buffer tube" off of the lower receiver. Step 2 was to expand (dremmel) the well at the rear of the 15-22's lower receiver to fit the included Ace mil spec aluminum buffer tube. I made sure not to remove any of the plastic directly behind the bolt. Step 3 was to epoxy the Ace buffer tube in place, letting it harden for 24-hours before installing the buttstock. It's quite solid.

 

[Kayback]

Step 1 of my project was to cut the 15-22's "buffer tube" off of the lower receiver. Step 2 was to expand (dremmel) the well at the rear of the 15-22's lower receiver to fit the included Ace mil spec aluminum buffer tube. I made sure not to remove any of the plastic directly behind the bolt. Step 3 was to epoxy the Ace buffer tube in place, letting it harden for 24-hours before installing the buttstock. It's quite solid.

Hmmmm that means you are stuck with the ACE no matter what?

Tempted to do that with the UBR.

KBK

 

[Sensei22]

Hmmmm that means you are stuck with the ACE no matter what?
Tempted to do that with the UBR.
KBK

Yes, it was meant to be a solid permanent mod. If I want another stock I'll just have to buy another rifle

 

[ultraman702]

Havin' fun with my 15-22...

Here's a shot of my "work in progress"...

From a stock A-1 Style Comp version, then adding a few extras to make it more MOE like...and an item here and there to make it more to my preference. I've always enjoyed modifying my cars so customizing an AR-style rifle fit right in.

 

[Bedrockk]

My MOE 15-22 w/ a bipod/foregrip attachment on her first day out of the box & at the range. Simple, but effective.

 

[bxny10455]

Here's my 15-22 with other FDE

 

[shawnr5]

Here's my 15-22 with other FDE
View attachment 80018

Is that the new ACS Lite on the right?

 

[bxny10455]

The one with the Eotech is wearing an UBR without the compartment plates.

 

[Kayback]

Browsing on my phone and can't zoom very well. Is it a 15/22 with an UBR? How? Do you have more info on it? Does it make everything too butt heavy?
Oh. Saw the forward assist. Not a 15/22?

 

[AirMech74]

You guys are gonna cost me money...I'm gonna have to change mine up a bit...here is my current config...

I think it's time to change out the forward handguard for a free float type, and I think I'm gonna Duracoat the whole thing.

 

[bad2006z71]

Here is my humble Bushmaster. Although not a S&W AR, the cost of 223 ammo lead to the purchase of an M&P15-22.

M&P-15-22...
Not complete, need to mimic the Bushmaster
BSA red dot
Yankee hill risers
CTR stock
Houge Grip
Magpul BUS rear

Bushmaster...
Primary Arms Micro dot
Midwest Industries Gen 2 Drop in rail
Magpul CTR stock
Magpul Ladder rails
Magpul BUS, rear
Magpul MIAD enhanced trigger guard
Tango Down Veritcal Fore Grip
Houge grip

Together..

 

[aberbaseball7]

Incomplete but getting there.

 

[bxny10455]

Browsing on my phone and can't zoom very well. Is it a 15/22 with an UBR? How? Do you have more info on it? Does it make everything too butt heavy?
Oh. Saw the forward assist. Not a 15/22?

One on the left is a .308 DPMS Oracle with a Vortex. The middle one is the 15-22 with an Aimpoint clone, the left one is a PSA built with the UBR & Eotech.

 

[Volc0m23]

Finally got around to taking a few pics.

 

[BP_Z28]

Nothing spectacular

Zombie Hunter rail covers OD
Magpul AFG 2 OD
Magpul MBUS OD
Generic ladder bar covers OD
Crayola fun
UTG low profile bipod

And I have another grip sitting in my case

 

[TylorR]

Magpul afg and rail covers added and 700 rounds at steel

Also recd a new scope for my mosin but couldn't resist mounting it. It's a crossman 3-9x 50

 

[XxLaloCuraxX]

Finally got the Vortex Crossfire II 3-9x40...

 

[nutbike]

Thanks: ฝากรูป

Excellent looking setup you got there Nutbike! One of the nicest I've seen on this forum! Care to share any details on the offset red dot you are using in this picture? Which red dot and mount are you running?

Sorry for late reply

This is my setup list
- Vltor stock (airsoft)
- Magpul MOE grip
- Troy battle sight (airsoft)
- Madbull VTAC Handguard 13" (airsoft)
- Sure Fire Muzzle Brake (airsoft)
- LaRue Scope Mount (airsoft)
- Trijicon Accupoint TR24R
- C-More STS 7 MOA
- C-More STS Scope Mount

 

[Kayback]

How has the Airsoft muzzle break held up? I'm thinking of getting my 15/22 threaded for 14mm instead of 1/2x28TPI because due to restrictions I can't get my hands on the real muzzle breaks.....

KBK