J-Frames and 25yard qualifications

I kinda felt like, "Hey if qualifying at 25 with the J-frame is a silly idea, I think the S&W forum guys would know best and would be willing to say so."

A J-Frame with a 2" barrel is really an "up close & personal" gun, read 7 yards or closer for most folks. Been able to qualifying with it at 25 yards take practice and skill. We used a 7 inch bullseye for our course of fire for shooting badges. For qualifying to carry for security we used a B-5 target. I was able to hit 24 10's at 15 and 25 yards with a 2' Model 36. So it can be done. For me that was over 30 years ago, could I do it now? Probably could hit the target at those ranges but a perfect score.........No.
 
I use 158 grain LSWC for a couple of reasons.
1. 158 grains is what I prefer for across the board shooting - hunting, personal defense. I also use in my 357 Mag loads
2. LSWC load better from a Speed Loader or Zip Strip
Other reasons escape me right now

148 grain are great for target shooting as they take up a lot of air space and make the lighter charges more accurate than if they had all of that air space. 158 LSWC are just more versatile. 158 round nose don't make a big enough hole. They are sometimes self sealing.
 
When I still carried a model 36 as a backup on the job, I'd have to qualify with it quarterly along with my semi-autos and long guns.

Handguns were out to 25 yards, and as I recall, there were only six rounds at that distance. So, it wasn't that bad, especially if you practice a bit.

Good luck.

(These days I carry my J-frame 642-1 around home and walking distances from home, but a larger (compact) semi-auto when I leave home.)

How big was the target?
 
Just an update and a thank you!
A Kimber K6 followed me home today
The serial number's first 3 numbers, 087.
Didn't plan that, just happened that way.

One of the ideas that made sense to me - having a heavier steel framed snubby revolver for practice, .357 use, and belt carry - and a lighter one for pocket carry.

For the "Steel frame ~22oz still concealable J-frame size .357", I chose the Kimber K6, just a preference thing. I was close to a 640PC!
I'll probably fire a good deal of .38 before I think about .357, and enough .357 to be comfortable carrying it.

The double action pull is spec'd to be in that 9.5lb range, and wow am I floored by how stable a small gun can feel with a smooth trigger. I get it now.
I really get the sense that with practice they are very shootable - not fullsize duty guns, sure, but still shootable.

To be quite honest I'm actually thinking my second small revolver might be a 642 Performance Center.
If the trigger is "almost" as good as the DA on the K6 after smoothing up, it might be just the ticket!
 

Attachments

  • Dutch87_087.jpg
    Dutch87_087.jpg
    18.3 KB · Views: 37
Hmmmm....State says you must qualify at 25 yards. I guess they think you can be justified in shooting people at 25 yards. I wonder if you could use that in your defense if you actually had to shoot someone that far away.
Just a random thought as I sit here.....

Sounds like a way (excuse) to disqualify people. I hardly ever see anybody shooting a handgun at 25 yards. When I do it people stare.
 
Hmmmm....State says you must qualify at 25 yards. I guess they think you can be justified in shooting people at 25 yards. I wonder if you could use that in your defense if you actually had to shoot someone that far away.
Just a random thought as I sit here.....

Depends on whether your opponent is shooting back.
 
I can hit a target at 25 yards. I choose not to because it's a waste of time and ammunition. I also practice point shooting, which is a fr more critical skill than distance shooting. Again, as always - YMMV ;)

We all make choices and we often disagree - but that's what makes life fun. :D

Yep........When I am playing(shooting) I all my handguns from .22 UP out to 100 yards or more.........Try it.........You may surprise yourself.
 
Back when I had to qualify 25yds always seemed to be the sticking point for most people, despite the generous time limits. Same with GSSF or other fun shoots, people always want to focus on the target looking for holes instead of focusing on the front sight. Don't overlook the need for updating a prescription if needed to accomplish this. As we get older we need to take every advantage, even if that's some shooting glasses with cheaters in the top of the lens. My PC642 has no issue with good hits at 25yds. All the body shots on this target were at 25yds.
 

Attachments

  • IMG_2333.jpg
    IMG_2333.jpg
    59.6 KB · Views: 39
Back when I had to qualify 25yds always seemed to be the sticking point for most people, despite the generous time limits. Same with GSSF or other fun shoots, people always want to focus on the target looking for holes instead of focusing on the front sight. Don't overlook the need for updating a prescription if needed to accomplish this. As we get older we need to take every advantage, even if that's some shooting glasses with cheaters in the top of the lens. My PC642 has no issue with good hits at 25yds. All the body shots on this target were at 25yds.


The 442PC and 642PC are at the top of the list right about now!
 
The premise in post #171 was an N frame 44 Mag. with factory iron sights. I'm older now, with eyes to match, so now I use a crosshair scope on the 8-3/8" M629. In the August match, I scored 39 out of 40 with it, firing double action. Usually, I only get 34 to 38 on average. In many years of shooting Met. Sil. I have shot 2, 40 out of 40s always shooting double action. Anyone can shoot a 40 with an 8 ounce trigger single shot. There's no real challenge in that.

However, I have hit Rams at 200M with a 2" M15 and 38 special loads. Not every shot, but maybe average 1 in 6 or so. It takes 2 or 3 seconds for the bullet to get there. My preferred J frame is the 640.
 
Last edited:
What's your preferred J-frame, if I may so ask!

I have to say I'm glad I sought everybody's feedback, snubby revolver culture is awesome - and this coming from a 1911 guy.

Hi Dutch,

Interesting thread and associated comments, some of which make sense, some of which less so.

I just re-acquired a CCW in Northern CA. I carried up here for years prior to moving to the Bay Area for quite a while. Upon retiring and returning to the North, I immediately became a member & Range Safety Officer at the close-by local outdoor range. I also ran into my former competition (USPSA) mentor (a USPSA Grand Master and in the top 10 nationally in Revolver Class). I started shooting steel plates once a week, drawing from the holster and am happy to say the skills didn't disappear entirely while I was shooting very little in the Bay Area.

CA requires that you qualify with each weapon you wish to carry, even if duplicative (i.e., 2 identical Glock 19s = 2 separate qualification sessions).

In addition to my 31 year old Glock 19, I qualified with a Kahr P45 and (pertinent to your thread), my old S&W Model 49 Bodyguard.

It is actually the gun I carry most often, in a leather pocket holster. No hammer to snag (bad joss to anyone claiming that is not a legitimate concern!), yet the hammer is there for those 25 yard shots. However, my law degree tells me that outside of the Indiana Mall situation, you are going to have a helluva time justifying a 25 yard shot!

Getting back into carrying involved some new learning as to gear, since the Glock is the only thing on my current permit that I also carried on my prior permit in this County many years ago.

I have decent quality IWB holsters for the Kahr & 49 (and updates for the Glock), but the leather pocket holster is SO convenient and it IS easy to draw from in the Duluth Cargo Pants I've adopted as my retiree attire. You can see how the gun disappears into the front (not the cargo) pocket without printing unless someone is really, really looking for it!

Every few weeks, after our Tuesday steel plate practice or our Thursday USPSA practice sessions, we will work out with our carry guns. So drawing from the pocket is not an abstract piece of BS I'm talking about re: the S&W.

Yes - attaining longer distance skill with the snubby you choose is wise & I would encourage it. However real world does say that the need for 25 yard snap multiple DA shots are highly unrealistic. Getting the gun out fast, getting the first shot off accurately at spitting distance or across the room distance, following up with a split second additional shot accurately, then accessing need/moving to secondary target if necessary and engaging, all while getting your butt off the X and preparing to reload - this is more real world stuff & more deserving of your concern.

Yeah, if I'm going out prolonged I'll probably have the Glock IWB carried with an extra 15 round mag, but for going to the local market and back I'm very comfy with the 49 and two speed strips. The 49 lives with 148 grain wadcutters in it. One speed loader has +P HP 38s (much easier to get into the cylinder in a hurry) and one has additional wadcutters (damn accurate & controllable, especially if one finds the single action cocked option advisable).

Good luck in your journey!

Dave
 

Attachments

  • Bodyguard w Hogue.jpg
    Bodyguard w Hogue.jpg
    146.9 KB · Views: 28
  • Duluth A.jpg
    Duluth A.jpg
    45.8 KB · Views: 26
  • Duluth D.jpg
    Duluth D.jpg
    63.4 KB · Views: 23
  • Duluth E.jpg
    Duluth E.jpg
    57 KB · Views: 26
Hi Dutch,

Interesting thread and associated comments, some of which make sense, some of which less so.

I just re-acquired a CCW in Northern CA. I carried up here for years prior to moving to the Bay Area for quite a while. Upon retiring and returning to the North, I immediately became a member & Range Safety Officer at the close-by local outdoor range. I also ran into my former competition (USPSA) mentor (a USPSA Grand Master and in the top 10 nationally in Revolver Class). I started shooting steel plates once a week, drawing from the holster and am happy to say the skills didn't disappear entirely while I was shooting very little in the Bay Area.

CA requires that you qualify with each weapon you wish to carry, even if duplicative (i.e., 2 identical Glock 19s = 2 separate qualification sessions).

In addition to my 31 year old Glock 19, I qualified with a Kahr P45 and (pertinent to your thread), my old S&W Model 49 Bodyguard.

It is actually the gun I carry most often, in a leather pocket holster. No hammer to snag (bad joss to anyone claiming that is not a legitimate concern!), yet the hammer is there for those 25 yard shots. However, my law degree tells me that outside of the Indiana Mall situation, you are going to have a helluva time justifying a 25 yard shot!

Yes, I couldn't agree more on that last part.

IMHO a hammer in my mind is good for 4 things:
1) Shooting a paper target at distance
2) A mass shooter at distance
Just in my mind, almost any other scenario where someone is that far away, you might be able to get away and that is preferable.
Mass shooter is basically the exception.
3) Weak hand only shooting/if injured in a scuffle.
4) When re-holstering, you can see if the hammer moves (trigger snagged when re-holstering)

Let me just say I was extremely surprised by how nice the DA trigger was on my Kimber K6. Coming from a high end 1911, a 9.5lb double action pull on a ~20oz gun sounds crazy it really does.
But it's pretty smooth, and with a strong hold, it does appear to be workable without being on Jerry Miculek's skill level.
It's made me seriously consider the 642 an 442s.

I was also pleased to find that IWB carry isn't THAT hard, with the right holster, it was not as hard for me as I thought it would be.

I'm glad I've started the thread and had some new ideas pointed out by the gentlemen on this board. Snub-nose revolver culture is awesome :cool:

Getting back into carrying involved some new learning as to gear, since the Glock is the only thing on my current permit that I also carried on my prior permit in this County many years ago.

I have decent quality IWB holsters for the Kahr & 49 (and updates for the Glock), but the leather pocket holster is SO convenient and it IS easy to draw from in the Duluth Cargo Pants I've adopted as my retiree attire. You can see how the gun disappears into the front (not the cargo) pocket without printing unless someone is really, really looking for it!

It absolutely does, I'll have to look into the Duluths!
Man the old Model 49s look so cool, I know some find them ugly but. I'm really taking a liking to looking at them.
I'm thinking I want to get a 638 and get it cerakoted.

Every few weeks, after our Tuesday steel plate practice or our Thursday USPSA practice sessions, we will work out with our carry guns. So drawing from the pocket is not an abstract piece of BS I'm talking about re: the S&W.

Yes - attaining longer distance skill with the snubby you choose is wise & I would encourage it. However real world does say that the need for 25 yard snap multiple DA shots are highly unrealistic. Getting the gun out fast, getting the first shot off accurately at spitting distance or across the room distance, following up with a split second additional shot accurately, then accessing need/moving to secondary target if necessary and engaging, all while getting your butt off the X and preparing to reload - this is more real world stuff & more deserving of your concern.

Yeah, if I'm going out prolonged I'll probably have the Glock IWB carried with an extra 15 round mag, but for going to the local market and back I'm very comfy with the 49 and two speed strips. The 49 lives with 148 grain wadcutters in it. One speed loader has +P HP 38s (much easier to get into the cylinder in a hurry) and one has additional wadcutters (damn accurate & controllable, especially if one finds the single action cocked option advisable).

Good luck in your journey!

Dave

Thank you for sharing! To be honest I think we're on the same page on the snub platform preference. I really am thinking a 638 with wadcutters in it is what's for me.
I already picked up a set of CT 405 grips from CDNN for a price I couldn't believe - so those are ready to go.

If I may so ask, you have a preferred brand of wadcutter?
 
"IMHO a hammer in my mind is good for 4 things:
1) Shooting a paper target at distance
2) A mass shooter at distance
Just in my mind, almost any other scenario where someone is that far away, you might be able to get away and that is preferable.
Mass shooter is basically the exception.
3) Weak hand only shooting/if injured in a scuffle.
4) When re-holstering, you can see if the hammer moves (trigger snagged when re-holstering)"

I've only been shooting single action for 70 years, so I may not have the experience others do - but in my opinion, it's greatest benefit is that it both greatly speeds up the draw and also increases trigger control, resulting in faster presentation and better accuracy.
 
25 yards with a J-frame is do-able. I shot my LEOSA qualification out to 25 with a 640 in .38 Special and wadcutters. Scored a 96 percent on a 50-round course. The course wasn't especially designed with five shot in mind.

I've got a Model 36 that, because the front sight (and unfortunately rear notch) are pretty narrow, it has a tendency to be the tightest shooting J-frame I have. I hope you can find wadcutters in sufficient enough supply to not only qualify and carry but also to practice with. And while you're at the practices stage (after you decide which one you want), unload the gun, check it twice, and dry fire, dry fire dry fire....

I used to have a Model 37. Bobbed the hammer. Wadcutters were tolerable. All else was hard to like.
 
Re: "If I may so ask, you have a preferred brand of wadcutter?"

Hey Dutch,

My friend/mentor loads for me. They're a basic 148 grain full wad cutter. I don't know the mold he uses or the load, but it is a pretty standard power cartridge.

attachment.php


attachment.php
 

Attachments

  • WC - 1.jpg
    WC - 1.jpg
    45.9 KB · Views: 175
  • WC - 2.jpg
    WC - 2.jpg
    92.2 KB · Views: 174
Back
Top